rose-displays supersnap with multiclips Manuel D’Utilisation
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
Parts
SuperSnap™
Step 1
Snap the SuperSnap open and insert
poster (top and bottom). Fig. 1
poster (top and bottom). Fig. 1
Note: It is easier to open and close
the SuperSnap by starting at one
end and working your way down
the holder.
the SuperSnap by starting at one
end and working your way down
the holder.
Step 2
To close, snap the SuperSnap shut.
Fig. 2
Fig. 2
Step 3
Squeeze sides of MultiClip together.
Fig. 3 Align the bottom rail of the
MultiClip with the top channel of
the plastic holder. Slide MultiClip
into rail. Fig. 4 Repeat step 3 for
second MultiClip.
Fig. 3 Align the bottom rail of the
MultiClip with the top channel of
the plastic holder. Slide MultiClip
into rail. Fig. 4 Repeat step 3 for
second MultiClip.
Step 4
Push end caps into place. Fig 5
Step 5
Suspend poster. Finished Look
Important note:
Please save and reuse the
SuperSnap, End Caps and
MultiClips for future projects.
SuperSnap, End Caps and
MultiClips for future projects.
Instruction Sheet
Instructions for assembly
Incept-8.5.02
The SuperSnap™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSSuperSnap
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSSuperSnap
Figure 2
Figure 5
Figure 3
Figure 1
Finished Look
Figure 4
SuperSnap
12S300
MultiClips
1UP-0100
End Caps
06-5475