jetway i406r1a Manuel D’Utilisation

Item Help

Anti-Virus Protection Disabled

Recovery Genius Enabled

Hard Disk Boot Priority Press Enter

CPU L1 &L2 Cache Enabled

Quick Power On Self Test Enabled

Hard Disk Boot Priority Press Enter

First Boot Device Floppy

Second Boot Device HDD-0

Third Boot Device CDROM

Boot other Device Enabled

Swap Floppy Drive Disabled

Boot Up Floppy Seek Enabled

Boot Up NumLock Status On

Gate A20 Option Normal

Typematic Rate Setting Disabled

Typematic Rate (Chars/Sec) 6

Typematic Delay (Msec) 250

Security Option Setup

APIC Mode Disabled

MPS Version Control For OS 1.4

OS Select For DRAM > 64MB Non-OS2

HDD S.M.A.R.T. Capability Disabled

Menu Level >

↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Optimized Defaults F7:Standard Defaults

Anti-Virus Protection
Allows you to choose the VIRUS Warning feature for IDE Hard Disk boot sector protection.
If this function is enabled and someone attempt to write data into this area, BIOS will show
a warning message on screen and alarm beep.

Disabled (default) No warning message to appear when anything attempts to access the

boot sector or hard disk partition table.

Enabled

Activates automatically when the system boots up causing a warning
message to appear when anything attempts to access the boot sector
of hard disk partition table.

CPU Internal Cache
The default value is Enabled.

Enabled (default) Enable cache
Disabled Disable cache

Note: The internal cache is built in the processor.
External Cache
Choose Enabled or Disabled. This option enables the Level 2 cache memory.
CPU L2 Cache ECC Checking
Choose Enabled or Disabled. This option enables the Level 2 cache memory ECC (error
check correction).
Quick Power On Self-Test
This category speeds up Power On Self Test (POST) after you power on the computer. If
this is set to Enabled. BIOS will shorten or skip some check items during POST.