jetway 650dfr1a Manuel D’Utilisation

 
 
 
                                                                                                                                                                                                                                                                                                                                                         

 
 
 

 

This connector connects to the hard disk activity indicator light on the case. 

This 2-pin connector connects to the case-mounted reset switch for rebooting your computer without 
having to turn off your power switch.  This is a preferred method of rebooting in order to prolong the 
lift of the system’s power supply.  See the figure below. 

 

This 4-pin connector connects to the case-mounted speaker. See the figure below. 

The Power LED is light on while the system power is on.  Connect the Power LED from the system case 
to this pin. 

This 2-pin connector connects to the case-mounted power switch to power ON/OFF the system.

 

  

   

 

 

These connectors support cooling fans of 350mA (4.2 Watts) or less, depending on the 
fan manufacturer, the wire and plug may be different.  The red wire should be positive, 
while the black should be ground. Connect the fan’s plug to the board taking into 
consideration the polarity of connector.  

    

 

 

FAN Speed Headers 

 

This connector supports the optional wireless transmitting and receiving infrared 
module.  You must configure the setting through the BIOS setup to use the IR function.

 

  

    

 

CIRRX 
GND 
CIRTX 

VCC 

NC