rose-displays ropole-spider Manuel D’Utilisation

The RoPole is a registered trademark of Rose Displays, Ltd.  Neither
the manufancurer nor any sales agent may be held liable for injury, loss
or damage resulting from the use of these products.  Part #INSSPRP

To install

Assemble poster, sign holders, hooks and anchor onto RoPole head
(see illustration). Rest heel of RoPole on floor. Loosen telescopic
joints and extend pole to the ceiling. Lock the RoPole joints.  If you
have the spring lock RoPole press button on pole, raise upper part
of pole until button snaps into the desired stop determined by the
ceiling height. Line up the wings of the RoPole head under the
ceiling grid (Fig. 1). Push up lightly against the grid. Twist the
RoPole to the right until the anchor locks.

To remove

Rest heel of RoPole on floor. Loosen telescopic joints and extend
pole to the ceiling. Firmly lock the RoPole joints.
Line up RoPole head parallel with grid as shown (Fig.2). Push up
lightly. With the anchor engaged in the RoPole head, turn the
RoPole to the left until the anchor releases. Lower slowly.

Helpful Hints

 •

Practice makes perfect!

•

Those not yet familiar with the RoPole should first practice
installing and removing the anchor from the ceiling without a
poster a few times.  Keep the RoPole vertical and directly
beneath the anchor.