dreamvision dl-500 Manuel D’Utilisation
18
Volume (+/-)
The Volume key is used to control the sound level
when the DreamVision DL500 is connected to an audio
source.
The Volume key is used to control the sound level
when the DreamVision DL500 is connected to an audio
source.
Channel
Click on the arrows left/right to switch between
pre-programmed TV channels when TV is
selected as source.
Click on the arrows left/right to switch between
pre-programmed TV channels when TV is
selected as source.
Focus
Press the Focus key to focus the projected image after
zooming to the correct size.
Press the Focus key to focus the projected image after
zooming to the correct size.
Zoom
Press the Zoom key to zoom the projected image to the
desired size.
Press the Zoom key to zoom the projected image to the
desired size.
Stand by
The stand by key will set the DreamVision DL500 in
stand by mode. The lamp will turn off, and the fans will
run for a little while cooling the projector before
stopping. To return to normal mode, press the Stand by
key once more, or press the Menu key on the remote
control.
The stand by key will set the DreamVision DL500 in
stand by mode. The lamp will turn off, and the fans will
run for a little while cooling the projector before
stopping. To return to normal mode, press the Stand by
key once more, or press the Menu key on the remote
control.
Automatic set-up
The automatic set-up key will set up the projector with
optimal settings for the connected source. If you want
to do manual adjustments you can do this by using the
menus (see section 7).
The automatic set-up key will set up the projector with
optimal settings for the connected source. If you want
to do manual adjustments you can do this by using the
menus (see section 7).
Note!
You can not access the screen menu
system without the remote control.
You can not access the screen menu
system without the remote control.
1183 (ELEK). LiteBeam ENG 15.10.98 14:16 Side 18