bw dm7 mk2 Fiche De Données

●

The DM7 represented a significant milestone in B&W’s history, since it was the first loudspeaker

system to benefit from our in-house computer system. Following the extensive research programme

completed for our professional monitor model 801, there were obvious advantages to be gained

by applying this technology to the DM7 MK2

●

A Purpose-designed stand with matching wood veneered base is supplied with the DM7 MK2.

This ensures that the centre of the listening window is at the correct height for listeners.

●

The crossover network was re-designed using B&W computer optimisation programme to

achieve fourth order Butterworth squared characteristic.

●

The bass midrange driver is a 160mm diameter piston formed from Matrix polyamide fibres.

The high-end frequencies are catered for with a TS26 high frequency transducer. Spheroidal

in shape and mounted on top of the speaker in a woven wire dome, it has excellent transient

response and high power-handling capability. Frequency response extends almost completely

linearly to beyond audibility. To minimise time delay distortion, the DM7 MK2 drive units are

stepped and arranged vertically in line.

B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.

1 x 26mm multi-filament polyester

weave dome 

2 x 160mm aromatic polymide fibre

matrix cone. 

80Hz – 20kHz ± 2dB free-field

1 watt into 8ohms for a s.p.l. of 86dB

at 1m sineware input at 1kHz

8 ohms nominal

40W or greater. No upper limit

because of electronic overload

protection device

Height: 900mm  Width: 270mm  

Depth: 382mm

Standard: teak or walnut 

Special: rosewood or black ash