King Technology prevail feeder (english) Manuel D’Utilisation
Apply teflon tape to the
threaded end of both hose
adapters.
threaded end of both hose
adapters.
Screw adapters into
each end of Cycler.
Tighten turning
each end of Cycler.
Tighten turning
Attach the filter section of
flex hose to one hose
adapter and the return
section of flex hose to the
other hose adapter with
clamps and tighten with
screwdriver.
flex hose to one hose
adapter and the return
section of flex hose to the
other hose adapter with
clamps and tighten with
screwdriver.
Base Installation
TOE NIPPLE
CHECK
VALVE
VALVE
BUSHING
HOSE
CLAMP
CLAMP
HOSE
ADAPTER
ADAPTER
HOSE
CLAMP
CLAMP
HOSE
ADAPTER
ADAPTER
1 1/2" X 1 1/2" X 1 1/4"
HOSE ADAPTER
HOSE ADAPTER
HOSE
CLAMP
CLAMP
FILTER &
PUMP
PUMP
The Cycler should always be installed between the
filter and pool (or between heater and pool if applicable).
filter and pool (or between heater and pool if applicable).
1 to 2 revolutions
with wrench.
DO NOT OVER TIGHTEN.
with wrench.
DO NOT OVER TIGHTEN.
1.
2.
3.
4.
5.
12
MATERIALS NEEDED:
Two
Hose
Clamps
Hose
Clamps
Corrosion Resistant
Check Valve
Check Valve
RECOMMENDED:
OPTION:
1 1/2" Threaded by
1 1/2" Slip Bushing.
1 1/2" Slip Bushing.
When installing with
hard PVC pipe, use
either a half union on
the outside port threads
or a bushing on the
inside port threads.
hard PVC pipe, use
either a half union on
the outside port threads
or a bushing on the
inside port threads.
#10 X 1 1/4" Phillips Pan
Head Screws with
Washers
Head Screws with
Washers
Half Union
or
INCLUDED
WITH CYCLER:
WITH CYCLER:
TO POOL
TO POOL
PUMP
FILTER
Installing a corrosion resistant check valve is recommended.
For better stability, Cycler may
be mounted on a base using
Phillips pan head screws.
be mounted on a base using
Phillips pan head screws.
TOOLS NEEDED:
Teflon Tape
Two Hose Adapters
1 1/2" X 1 1/2" X 1 1/4"
1 1/2" X 1 1/2" X 1 1/4"
Two Sections of
of 1 1/2" Flex Hose
(one provided with
filter)
of 1 1/2" Flex Hose
(one provided with
filter)
Screwdriver
Pipe Wrench