Belinea 1905 g Manuel D’Utilisation

Belinea 1905 G1 - Operating Instructions - 

Carefully lift the monitor out of the packaging and make 

sure that all components are included (see fig. 1).
Save the original box and packing material in case you 

have to ship or transport the monitor.
To  set  up  the  device,  you  must  fit  the  monitor  base

together.

1.  First start your PC and then turn on your Belinea 

monitor  using  the  power  switch  (

†

 in  fig.  4).  The

status indicator (

…

in fig. 4) should light up green.

.  Adjust the image to meet your requirements (see the

following sections “Basic Setup” and “Image settings 

using the OSD menu”).

.  If there is no image displayed on the monitor, consult 

the section “Troubleshooting”.



1.  Make sure that the PC and monitor are unplugged. 
.  Connect  the  15-pin  signal  cable  to  the  PC  (see  

fig. 2).



Connect the separate power cable (



 in fig. 3) to the

monitor and a grounded outlet.

1