merging mykerinos Manuel D’Utilisation
Merging Technologies
20
Mykerinos User Manual
10 Typical Audio Connections between DUA II & Mykerinos
This section will display some typical audio connection scenarios for DUA II and Mykerinos.
10.1 Audio for Video with SONY Digital BetaCam Users
This example is based on Video NLE & DAW users who are using the Mykerinos in conjunction with
a DUA II audio interface and a Digital BetaCam video deck.
a DUA II audio interface and a Digital BetaCam video deck.
V
IDEO
& D
IGITAL
A
UDIO
W
ORKSTATION
This example shows the following connections:
• The Digital BetaCam outputs are routed through the AES/EBU inputs of the DUA II to the
• The Digital BetaCam outputs are routed through the AES/EBU inputs of the DUA II to the
Mykerinos input channels 1-4 (ADAT).
• The Mykerinos output channels 1-4 (ADAT) are routed through the AES/EBU outputs of the DUA
II to the Digital BetaCam inputs.
• The Mykerinos output channels 1-4 (ADAT) are routed through the analog outputs of the DUA II
to the monitoring system.
(Alternate monitoring is provided by the front panel monitoring selection of the DUA II or the
stereo monitoring of the Mykerinos board).
(Alternate monitoring is provided by the front panel monitoring selection of the DUA II or the
stereo monitoring of the Mykerinos board).
• The Mykerinos card (via VIDEO/TC bracket or the breakout cable - CVS1IN Input) and the Video
Deck are connected to the Video Ref. generator.
Note that each device should be connected to the video generator with its own cable.
Using the Loop-Through to connect the different devices is not recommended.
Note that each device should be connected to the video generator with its own cable.
Using the Loop-Through to connect the different devices is not recommended.
• The DUA II is set to ODI sync mode and AutoDetect SR mode.
• The DIP switches 1-8 must be set to: X – X – X – X – OFF – OFF – OFF – OFF.