valentine-one v1 Manuel D’Utilisation

Slide Fuse Ejector along its channel to eject fuse. A firm push
will be needed. Replace with 2 amp, Mini Blade Fuse.

Push Fuse Ejector towards fuse to eject.

1.

Slide Lighter Adapter with Articulated Bracket into
cavity on back of Concealed Display Module.

2.

Connect Acc on Lighter Adapter to Concealed    
Display with 3-inch cord.

3.

Adjust angle on Lighter Adapter, then insert Lighter    
Adapter into lighter socket.

4.

Run the power cord from the Main jack on the 

Lighter Adapter to Valentine One.

5.

To operate, adjust Control Knob and Control Lever 
on Valentine One to your desired settings.

IMPORTANT NOTE:  Do not use Direct-wire Power 
Adapter with Lighter Adapter.

1.

Slide Mounting Plate into cavity on back of 
Concealed Display Module.

2.

If using Dual Lock

®

, adhere one square of Dual 

Lock

®

to the recess on the back of the Mounting 

Plate. Adhere mating Dual Lock

®

square to desired 

mounting location.

3.

If using the Direct-wire Power Adapter, follow 
instructions on page 19.

4.

Run a power cord from the Acc jack on the Lighter 
Adapter, or the Accessory jack on the Direct-wire 
Power Adapter, to the Concealed Display Module.

5.

Run a power cord from Main jack on the Lighter 
Adapter, or the Main Unit jack on the Direct-wire 
Power Adapter, to Valentine One.

6.

To operate, adjust Control Knob and Control Lever 
on Valentine One to your desired settings.

IMPORTANT NOTE:  Do not use Lighter Adapter with
Direct-wire Power Adapter.

Valentine One

Power Cord 3-in.

Concealed Display

Lighter Adapter

Power Cord

Acc

Main

Valentine One

Power Cord

Direct-wire

Power Adapter

Power Cord

Concealed Display

Ground

(Black)

+12VDC

  (Red)

Lighter Adapter slides into place.

Mounting plate slides into place.

Acc: Plug cord to
Concealed Display 
or Remote Audio 
Adapter here.

Articulated
bracket may be
removed when
not needed for
Concealed
Display.

Main: Plug power 
cord to V1 here.

▲ 

▼