Belinea 1705 s1 Manuel D’Utilisation
Belinea 1705 S1 - Operating Instructions -
ENGLISH
BASIC SETUP
Automatic Image Adjustment .................................
you can adjust the image settings (such as image posi-
tion, phase, etc.) manually or by using the LCD monitor’s
automatic image adjustment feature. This will adjust the
image parameters to their optimal settings for the cur-
rent graphics mode. Press
AUTo (
in fig. 4) to launch
the automatic adjustment. The process will take a short
while until completed.
IMAGE SETTINGS USING THE oSD MENU
Figure 4. Monitor features
Monitor setup under Windows
®
9x/ME/000
and XP:
If using the monitor under Windows
If using the monitor under Windows
®
9x/ME/2000 or
xP, we strongly recommend installing the Belinea con-
figuration file. you can obtain this file from your Belinea
dealer or download it from the MAxDATA FTP server
at ftp.maxdata.com.
Here, click the “Belinea_Treiber_Driver” directory and
Here, click the “Belinea_Treiber_Driver” directory and
download the Belinea.inf and README_Belinea.TXT
files. Follow the installation instructions in the README_
Belinea.TXT file.
Monitor setup under Windows
®
NT .0:
Under Windows
®
NT 4.0 no separate setup file is
required. Select the vertical frequency and the number
of colors directly from within the “Settings” “control
Panel” “Display” “Settings” menu.
CoNFIGURATIoN
AUTO
MENU
1
6
Locking and Unlocking the oSD ............................
Holding down the
MENU button (
in fig. 4) for 10
seconds locks the OSD menu and a corresponding
message is displayed. you can deactivate this function
by holding down the
MENU button for 10 seconds once
again.
The OSD menu is a window on your screen that allows
you to view and change display settings. To change an
OSD setting:
1. Press the MENU button (
1. Press the MENU button (
in fig. 4) to display the
OSD menu on the screen.
. There are a total of 12 OSD submenus divided by
categories. Select the desired submenu by press-
ing the OSD button or
(
and
in fig. 4; see
section “OSD Menu Functions”).
. Press the OSD button MENU (
in fig. 4) to activate
the selected function or associated submenu.
. If you selected a submenu, now select the subfunc-
tion you want using the or OSD button (
and
in fig. 4).
. Activate the selected option with the MENU button.
Set the desired value using the OSD button or
(
and
in fig. 4). The new settings will take effect
immediately.
6. Repeat steps 2–5 to make further adjustments as
needed.
7. The OSD menu automatically disappears if no
changes are made for more than 15 seconds (default
setting). The current settings will be saved. you can
also close it manually by activating the
EXIT cat-
egory.