techwood cdc86 Manuel D’Utilisation

To determine any problem with your CD changer, always check the most obvious possible causes first. If any problem still
remains after you have checked the items below, consult your nearest TECHWOOD dealer.

No power when the POWER button is
set to ON.

Power plug not connected in the AC
outlet.

Insert the power plug firmly i nto the AC
outlet.

The disc is loaded upside down.

Reload the disc with the label side up.

Disc play does not start.

The disc is too dirty.

Clean the disc.

Incorrect audio cable connections.

Correctly connect the CD changer to
the amplifier.

No sound.

Incorrect amplif ier operation.

Make sure that the amplifier control s
are set correctly.

The CD changer is subject to vibration
or physical shock.

Change the installation locati on.

Sound skips.

Defective or deeply scratched disc.

Play another disc.

Programmed play does not funct ion.

The CD changer is in the normal play
mode.

Press the stop button, then enter a pro-
gram.

A “Hum” sound can be heard.

Loose cable connections.

Firmly connect all  the cables.