Becker 7910 dtm hs Guide De Montage
Subject to correction and technical modifications
33
Copyright by Becker GmbH, D-76303 Karlsbad
Installation guide
•
Inside the vehicle
a. Secure the antenna to the base plate (1) with magnets.
b. Remove protective strip from top of adhesive tape (2) and stick to the centre of the base plate underside.
c. Remove protective strip from bottom of adhesive tape (2) and stick the antenna and base plate onto the vehicle
console beneath the windscreen at the installation position.
The antenna can only be installed on a non-metallised windscreen.
When selecting the installation position, ensure that the antenna has a clear view of all directions, and that it is not
covered by the windscreen wipers. Obstructions caused by the bonnet, window crossbeams and roof should be
avoided as far as possible.
When selecting the installation position, ensure that the antenna has a clear view of all directions, and that it is not
covered by the windscreen wipers. Obstructions caused by the bonnet, window crossbeams and roof should be
avoided as far as possible.