HP Intel Xeon E5506 610864-L21 Manuel D’Utilisation

HP NC325m PCI Express Quad Port 1Gb Server Adapter for c-Class
BladeSystem

NOTE: If the NC325m is installed in mezzanine slot 1 of a half-height server,
connectivity will be provided on 2 of the 4 ports.

416585-B21

HP NC364m Quad Port 1GbE BL-c Adapter

NOTE: If the NC364m is installed in mezzanine slot 1 of a half-height server,
connectivity will be provided on only 2 of the 4 ports.

447883-B21

HP NC382m Dual Port 1GbE Multifunction BL-c Adapter

453246-B21

HP BLc QLogic iSCSI Dual Port Adapter

488074-B22

NOTE: The Gigabit Ethernet adapters above transmit from the server at 2000
Mbps, full duplex per port only. For more information, see the "Network
Controller" segment in the Standards Features section.

 

 

HP NC522m Dual Port 10GbE Multifunction BL-c Adapter

NOTE: The NC522m network adapter card is required for each server blade
connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000
Enclosure) or bays 3-4 (HP BladeSystem c3000 Enclosure).
NOTE: The NC522m requires a minimum of 2 GB of server memory.
NOTE: The NC522m supports linking at 1000Mbps or 10000Mbps when not
connected to a Flex-10 enabled module and will link with all current 1Gb
switches at 1Gb.

467801-B21

HP NC532m Dual Port 10GbE BL-c Adapter

NOTE: The NC532m network adapter card is required for each server blade
connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000
Enclosure) or bays 3-4 (HP BladeSystem c3000 Enclosure).
NOTE: The NC532m requires a minimum of 2 GB of server memory.
NOTE: The NC532m supports linking at 1000Mbps or 10000Mbps when not
connected to a Flex-10 enabled module and will link with all current 1Gb
switches at 1Gb.

467799-B21

HP NC542m Dual Port Flex-10 10GbE Multifunction BL-c Adapter

NOTE: The NC542m network adapter card is required for each server blade
connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000
Enclosure) or bays 3-4 (HP BladeSystem c3000 Enclosure)
NOTE: The NC542m requires a minimum of 2 GB of server memory.
NOTE: The NC542m supports linking at 1000Mbps or 10000Mbps when not
connected to a Flex-10 device. The NC542m will only support 1000Mbps when
connected to a 1Gb Ethernet interconnect.

539857-B21

HP NC550m 10GbE 2-port PCIe x8 Flex-10 Ethernet Adapter

NOTE: The NC550m network adapter card is required for each server blade
connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000
Enclosure) or bays 3-4 (HP BladeSystem c3000 Enclosure)
NOTE: The NC550m requires a minimum of 2 GB of server memory.
NOTE: The NC550m supports linking at 1000Mbps or 10000Mbps when not
connected to a Flex-10 device. The NC550m will only support 1000Mbps when
connected to a 1Gb Ethernet interconnect.

581204-B21

DA - 13706   Worldwide QuickSpecs — Version 1 — 9.8.2010

Page 19