Panasonic PT-DZ770E Mode D’Emploi

Switch the setting when the projector is connected to 

an external device via an HDMI cable and the image 

is not projected correctly.

1)  Press ▲▼ to select [HDMI IN].
2)  Press the <ENTER> button.

▶

z

The 

[HDMI IN] screen is displayed.

3)  Press ◀▶ to switch [HDMI SIGNAL 

▶

z

The setting will change as follows each time 

you press the button.

Select when the DVI-D terminal 

output of an external device (such 

as a computer) is connected to the 

<HDMI IN> terminal via a conversion 

cable or similar cable.

Select also when the HDMI terminal 

output of a computer or other device 

is connected to the <HDMI IN> 

terminal.

Select when the HDMI terminal of 

an external device (such as a blu-

ray disc player) is connected to the 

<HDMI IN> terminal.

 

z

The optimal setting is different depending on the 

output setting of the connected external equipment. 

Refer to the instruction manual of the external 

equipment regarding the output of the external 

equipment.

 

z

The HDMI signal level is displayed per each 30 bits 

of input.

Set the on-screen display.

1)  Press ▲▼ to select [ON-SCREEN 

▶

z

The 

[ON-SCREEN DISPLAY] screen is 

displayed.

3)  Press ▲▼ to select an item, and press 

◀▶ to change the setting.

▶

■[OSD POSITION]

Set the position of the menu screen (OSD).

▶

z

The setting will change as follows each time 

you press the button.

▶

■[OSD DESIGN]

Set the color of the menu screen (OSD).

▶

z

The setting will change as follows each time 

you press the button.

▶

■[OSD MEMORY]

Set hold for the position of the menu screen (OSD) cursor.

▶

z

The setting will change as follows each time 

you press the button.

 

z

Even if set to [ON], the cursor position will not 

be held when the <MAIN POWER> switch of the 

projector body is turned <OFF>.