Panasonic PTD9610E Mode D’Emploi

3

This is a high-luminance DLP

TM

based projector which is powered by a single-phase, 3-wire type 200 V–240 V

power supply. It utilizes three RGB DMD

TM

chips and a high-output xenon lamp. By fitting a projection lens and input

module (sold separately) in accordance with the setting-up location and the type of input signal, it can project
images onto screens from 2,5 m (100 inches) to 15 m (600 inches) in size.
By installing an input module (sold separately), the unit can handle various types of RGB signals, chrominance
signals for high-vision TMDS (Transition Minimized Differential Signalling)-type digital interface, and also NTSC,
NTSC4.43, PAL, SECAM, PAL-M, PAL60, PAL-N video signals, Y/C signals and serial digital (SDI) signals.etc.
Besides this, the projector is equipped with an RS-232C / RS-422 connector so that it can be controlled by means of
a personal computer or signal selector.
Other functions available include selection of the projection method (ceiling/floor/rear), an ID number assignment
function which is useful for controlling multiple projectors simultaneously, keystone(trapezoidal distortion)correction
and a lens focus/position adjustment (optical axis shift) function. All settings and adjustments during the setting-up
process can be carried out easily by using on-screen menus.
In addition, a self-diagnosis display function is also provided. This function generates and displays a two-digit error
code to notify you if a problem occurs with operation of the projector.
DMD

TM

chip’s aspect ratio is 4:3 on the PT-D9510E or 5:4 on the PT-D9610E.

A contrast of 1 000 : 1 (Contrast mode; When super), which match that of e-cinema is realized using a new 1 600 W
xenon lamp and luminous control technology.

The unit can be controlled from a PC using a LAN interface, and also has an e-mail automatic send function, so the

implementation of a remote control or central control system for handling unit problems is easy.

The projector utilizes a DLP

TM

(Digital Light Processing) system which incorporates an 0.9-inch(for the PT-D9510E)/1.1-

inch (for the PT-D9610E) DMD

TM

(Digital Micromirror Device) having a display resolution of 1 024 x 768 dots(for the 

PT-D9510E)/1 280 x 1 024 dots(for the PT-D9610E) that produces a three-layer image from R, G and B layers. 
This system produces images with high resolution and color reproduction which is faithful to the source. Because it can
handle dot clock frequencies ranging from 20 MHz to 162 MHz, computer images with signal resolutions of up to 1 600 x
1 200 dots can also be input. However, if the display resolution is greater than 1 024 x 768 dots(for the PT-D9510E)/
1 280 x 1 024 dots (for the PT-D9610E), A-PIC (Advanced Panasonic Intelligent Compression) automatically converts
the image to a resolution of 1 024 x 768 dots(for the PT-D9510E)/1 280 x 1 024 dots(for the PT-D9610E)without causing
any lines or characters to disappear, and without causing any flickering.

The adoption of a new type of processing circuit exclusively for moving images converts the signals to images
which are comfortable to view with no flickering or loss of quality from the image source.