Panasonic PTLC70U Mode D’Emploi
62
Previousscreen
• Cooling fan malfunction.
• Misinstalled Air Filter
Unit or Lamp cover.
• Ambient temperature is
low (less than 0 ºC)
• Clogged air filter.
• Blocked air intake.
• Blocked air intake.
• The surrounding
temperature of the place
of use may be too high.
of use may be too high.
• If the Lamp will not light
after turning on the
main power 2 or 3
times, the Lamp may be
damaged.
main power 2 or 3
times, the Lamp may be
damaged.
• Lamp Voltage is not
correct.
• Abnormal temperature
rise.
• Other causes.
• It is nearly time to
replace the Lamp Unit.
• The Lamp Unit must be
replaced.
• Take the Projector to your nearest
Service Center.
• Properly install Air Filter Unit or
Lamp cover.
• Place Projector so that surrounding
temperature is between 0
°
C (32
°
F)
and 40
°
C (104
°
F) and the humidity
is between 20 % and 80 % (with no
condensation.)
condensation.)
• Clean the filter.
• Relocate projector to a proper
• Relocate projector to a proper
location.
• Place Projector so that surrounding
temperature is between 0
°
C (32
°
F)
and 40
°
C (104
°
F) and the humidity
is between 20 % and 80 % (with no
condensation.)
condensation.)
STATUS
Code
Code
Possible Solution
Lamp does
not light up.
not light up.
Problem
Status Code Display Indications
Symptom
Lamp operation
time is over
1 900 hours.
time is over
1 900 hours.
Lamp operation
time reaches
2 000 hours.
Forced cooling
fan operating to
expedite lamp
replacement.
time reaches
2 000 hours.
Forced cooling
fan operating to
expedite lamp
replacement.
• Take the Projector to your
nearest Service Center.
• Replace the Lamp unit.
F-L
C-0
A-n
A-0
L-n
P-2
P-3
P-4
L-1
L-0
C-d