Panasonic NRB53VW2 Mode D’Emploi

Installation

The refrigerator comes on four casters to enable it to be moved easily.

Carefully read through the section “Choosing the right location”, and install the refrigerator in the best location. 

Once the installation location has been decided upon, secure the refrigerator, and adjust it so that it is level.

Removing the front grille

When the two doors are opened and the front grille is viewed from 

above, two screws – one on the left and the other on the right – will 

be seen.

Turn these screws counterclockwise, and remove them.

There is a connecting area slightly to the right of the centre of the 

front grille at the bottom. Take hold of this area, and pull the grille 

toward you to remove it.

Front grille

Connecting area

Securing the refrigerator

Insert a flat screwdriver into a slot on the adjustable legs at the left 

and right, turn them in the direction shown by the arrows to lower 

the legs to the floor level, and then secure the legs firmly.

Adjustable legs

Levelling the refrigerator

Turn the adjustable legs so that the refrigerator is installed flush with the floor. 

If the left and right doors are not flush with each other, turn one of the adjustable legs, and bring the doors 

into alignment.

If the left door is lower than the right door
Insert a flat screwdriver into a slot on the 

adjustable leg on the left, turn it in the direction 

shown by the arrow, and adjust.

If the right door is lower than the left door
Insert a flat screwdriver into a slot on the 

adjustable leg on the right, turn it in the direction 

shown by the arrow, and adjust.

Attaching the front grille

Follow the steps for removing the grille in their reverse order.

 

● Take care not to pinch or damage the water supply hose.