Panasonic KXMC6020HX Mode D’Emploi
2. Preparation
20
2 Preparation
Connections and Setup
2.1 Connections
Caution:
L
When you operate this product, the power outlet
should be near the product and easily
accessible.
should be near the product and easily
accessible.
L
Be sure to use the telephone line cord supplied
with this unit.
with this unit.
L
Do not extend the telephone line cord.
Note:
L
If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.
telephone line, this unit may disturb the network
condition of the device.
L
If you use the unit with a computer and your internet
provider instructs you to install a filter (
provider instructs you to install a filter (
9), please
connect it as follows.
L
A telephone handset cannot be connected directly to
this unit. To talk to the other party, please connect an
extension telephone.
this unit. To talk to the other party, please connect an
extension telephone.
Using network router/network hub
L
We recommend using network routers/network hubs
(
(
6) under secure network environments. Consult
your network administrator for firewall settings, etc.
L
The warranty does not cover damage due to security
problems or any disadvantages relating to it.
problems or any disadvantages relating to it.
1 Power cord
L
Connect to a power outlet
(220–240 V, 50/60 Hz).
(220–240 V, 50/60 Hz).
2 Telephone line cord
L
Connect to a single telephone line jack.
3 [EXT] jack
L
You can connect an answering machine or an
extension telephone. Remove the stopper if
attached.
extension telephone. Remove the stopper if
attached.
4 Answering machine (not supplied)
5 To the internet
6 Network router/Network hub (not supplied)
L
Also connect networked computers.
7 LAN cable (not supplied)
L
To assure continued emission limit compliance,
use only shielded LAN cable (category 5 straight
cable).
use only shielded LAN cable (category 5 straight
cable).
8 Automatic duplex unit (optional) connector
1
5
3
6
8
7
2
4
IMPORTANT NOTICE FOR THE USB
CONNECTION
CONNECTION
L
DO NOT CONNECT THE UNIT TO A
COMPUTER WITH THE USB CABLE UNTIL
PROMPTED BY THE MULTI-FUNCTION
STATION (page 27).
COMPUTER WITH THE USB CABLE UNTIL
PROMPTED BY THE MULTI-FUNCTION
STATION (page 27).
Designed to be used in Czech, Hungary, Slovakia
and other Eastern Europe according to the
location setting feature.
The default setting is other Eastern Europe. To
change the location setting, see page 61 (feature
#114).
and other Eastern Europe according to the
location setting feature.
The default setting is other Eastern Europe. To
change the location setting, see page 61 (feature
#114).
9