Panasonic CULZ35TKE Mode D’Emploi

13

English

 T

roubleshooting

AUTO

OFF/ON

1.Raise the front panel.

2.Press the button once to use in AUTO mode.

3. Press and hold the button until you hear 1 beep, then release to 

use in forced COOL mode.

4. Repeat step 3. Press and hold the button until you hear 2 

beeps, then release to use in forced HEAT mode.

5.Press the button again to turn off.

■The indicators are too bright
• To dim or restore the unit’s indicator brightness, press 

 and hold for 5 seconds.

■ Conducting a seasonal inspection after extended non-use
• Check the remote control batteries.
• Check that there is no obstruction around the air inlet and outlet vents.
• Use Auto OFF/ON button to select COOL/HEAT operation. After 15 minutes of operation, it 

is normal to have the following temperature difference between the air inlet and outlet vents: 

COOL: ≥ 8 °C / 14.4 °F

  

HEAT: ≥ 14 °C / 25.2 °F

■ The units are not going to be used for a long period of time
• Activate HEAT mode for 2~3 hours to remove moisture left in the internal parts thoroughly to 

prevent mould growth.

• Turn off the power supply and unplug.
• Remove the remote control batteries.

NON SERVICEABLE CRITERIAS
TURN OFF THE POWER SUPPLY AND UNPLUG then please consult an authorised 

dealer when in following conditions:

• Abnormal noise during operation.
• Water/foreign particles have entered the remote control.
• Water leaks from Indoor unit.
• Circuit breaker switches off frequently.
• Power cord becomes unnaturally warm.
• Switches or buttons are not functioning properly.