Panasonic TH-47LFT30W Mode D’Emploi

Page de 18
4
 
Driver Software Operating Environment
The Driver software is supported by both the Japanese and English versions of Windows XP (SP3 or later), 
Windows XP x64 Edition (SP2 or later),  Windows Vista (SP1 or later),   Windows Vista x64 Edition (SP2 or 
later), Windows 7, and Windows 7 x64 Edition.
The following environment is required to correctly install and start up the Driver software.
<Windows XP/Vista/7>
•  CPU … Pentium IV or later (2 GHz or faster Celeron or Pentium 4 recommended)
• Memory … 512 Mbytes or more 
• HDD … 150 Mbytes or more available area
• Compatible with USB 1.1/2.0 interface
 
Driver Software Restrictions
•  The mouse emulation feature cannot be used on the login window that appears at Windows startup, when 
restoring from the suspended state or when the screen saver is unlocked. The mouse emulation feature is 
activated after you log in.
•  There is no remote wakeup feature that activates the screen from the suspended state by touching the 
touch panel.
•  If your system does not meet the requirements above or the applications use up too much memory, the 
response of the touch panel may slow down. 
• Only Windows is supported. (Operation is not guaranteed in other environments than the above.)
•  If using Windows Vista/7 and user account control, the touch panel does not respond to touch when 
windows, such as the Properties window, that require administrator authority to access appear.
 
Restrictions on competing drivers 
•  If you try to install a driver from another manufacturer in the same computer in which this Driver software 
is installed or inversely try installing this Driver software in a computer where another driver is already 
installed, the driver may not install properly.
In such case, uninstall the current driver and then install the new driver.
Also, if a driver from another manufacturer is started up while this Driver software is already running, the 
error message “A driver is already running.” may be displayed.
In such case, quit both drivers and then start up the driver you want to use.
Setup Procedure
Connect the computer to the USB port of the display
(P. 7)
1
Install the Driver software to your computer
(P. 5)
Do not connect the USB cable yet.
Restart your computer
•  After restarting your computer, check 
 appears in the task tray.
2
3
Calibrate the touch panel
(P. 15)
This completes the basic setup.
4