Panasonic ES2063 Mode D’Emploi

Page de 136
4
English
Charging the appliance
Charging
1. Plug the charger into the epilator () and a 
household outlet ().
2. Charge the appliance for approximately 1 hour. 
(Charging is completed when the charging light 
blinks.)
The epilator can be used for approximately 30 
minutes after 1 hour charge.
While charging:  Red light appears.
After charging is completed:
Blinks once every second.
10 minutes after charging is completed:
Blinks once every 2 seconds.
Abnormal Charging:  Blinks twice every second.
The charge light may not turn on after a few minutes in some cases. 
However, it will turn on eventually if you continue charging.
The appliance can be left plugged in after it is fully charged without 
deteriorating the battery life.
The recommended charge temperature is 15-35 °C.
If you use the charger in temperature outside of the recommended range, 
the following problems might occur.
The time it takes to charge the appliance increases. (approximately 3 
hours)
The charger stops functioning.
If you use the charger in low temperature, the battery life might be 
reduced.
The charger can be positioned in a vertical or horizontal position. 
Wet/foam epilation
Using
This epilation head is for legs/arms, so do not use it to your 
underarms and bikini-line.
Trim your hair before epilating for the fi rst time or if you have not epilated 
for a long time.
The recommended use temperature is 5-35 °C.
If you use the appliance in temperature outside of the recommended 
range, it may stop functioning or might reduce the operating time.
1.  Wet your skin.
-
-
ES2063_EU.indb   4
2008/07/02   20:49:16