Panasonic KXMB2061FX Mode D’Emploi
Feature/Code
Selection
Changing the receiving mode
in the auto answer setting
MBNM4NM0NM0N
in the auto answer setting
MBNM4NM0NM0N
M1N “TAM/FAX” (default): Telephone Answering Machine/Fax mode (page 62)
M2N “FAX ONLY”: Fax only mode (page 63)
M2N “FAX ONLY”: Fax only mode (page 63)
Setting the waiting time for
the power save mode
MBNM4NM0NM3N
the power save mode
MBNM4NM0NM3N
To set the length of time before the base unit enters power save mode.
M1N “5min” (default): 5 minutes
M2N “15min”: 15 minutes
M3N “30min”: 30 minutes
M4N “1h”: 1 hour
M1N “5min” (default): 5 minutes
M2N “15min”: 15 minutes
M3N “30min”: 30 minutes
M4N “1h”: 1 hour
Note:
R When in power save mode, the unit needs to preheat the fuser unit before
R When in power save mode, the unit needs to preheat the fuser unit before
it can begin printing.
Changing the receiving mode
in the manual answer setting
MBNM4NM0NM4N
in the manual answer setting
MBNM4NM0NM4N
M1N “TEL” (default): Telephone mode (page 64)
M2N “TEL/FAX”: Telephone/Fax mode (page 64)
M2N “TEL/FAX”: Telephone/Fax mode (page 64)
Holding the previous contrast
setting
MBNM4NM6NM2N
setting
MBNM4NM6NM2N
M0N “DISABLED” (default): Deactivates this feature.
M1N “ENABLED”: The unit will hold the previous setting.
M1N “ENABLED”: The unit will hold the previous setting.
Note:
R The previous setting will be held individually for copying.
R The previous setting will be held individually for sending faxes.
R The previous setting will be held individually for copying.
R The previous setting will be held individually for sending faxes.
Setting the default operation
mode
MBNM4NM6NM3N
mode
MBNM4NM6NM3N
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
M1N “COPY” (default): Copy mode is selected as default.
M2N “FAX”: Fax mode is selected as default.
(feature #464) passes.
M1N “COPY” (default): Copy mode is selected as default.
M2N “FAX”: Fax mode is selected as default.
Note:
R You cannot select the scan mode using this feature.
R You cannot select the scan mode using this feature.
Setting the default operation
mode timer
MBNM4NM6NM4N
mode timer
MBNM4NM6NM4N
To set the timer before returning to the default operation mode (feature #463).
M0N “OFF”: Deactivates this feature.
M1N “30s”: 30 seconds
M2N “1min” (default): 1 minute
M3N “2min”: 2 minutes
M4N “5min”: 5 minutes
M0N “OFF”: Deactivates this feature.
M1N “30s”: 30 seconds
M2N “1min” (default): 1 minute
M3N “2min”: 2 minutes
M4N “5min”: 5 minutes
Setting toner save feature
MBNM4NM8NM2N
MBNM4NM8NM2N
M0N “OFF” (default): Deactivates this feature.
M1N “ON”: The toner cartridge will last longer.
M1N “ON”: The toner cartridge will last longer.
Note:
R This feature may lower the print quality by reducing toner consumption.
R This setting is valid for copying, and when the unit automatically prints
R This feature may lower the print quality by reducing toner consumption.
R This setting is valid for copying, and when the unit automatically prints
reports/lists.
R This setting is invalid for printing received faxes.
*1 When this setting is changed using the base unit, the setting for the cordless handset will also be changed, and
vice versa.
*2 This setting can be changed individually for the base unit and the cordless handset.
– To set the cordless handset LCD display contrast, see page 97.
– To set the cordless handset ringtone for outside calls, see page 97.
– To set the cordless handset keytone, see page 97.
– To set the cordless handset ringtone for outside calls, see page 97.
– To set the cordless handset keytone, see page 97.
80
10. Programmable Features