Panasonic KX-TD1232 Manuel D’Utilisation

2-31

Allows you to assign a Flexible (CO, DSS, PF) button as the VM Transfer button.

— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].

1. Press the desired Flexible (CO, DSS, PF) button which you

wish to assign as the VM Transfer button.

2. Dial 82.

• The display shows:

3. Dial the extension number of the Voice Mail.

• The display shows:

(— xxxx: VM extension

number)

• To erase an incorrect entry, press the CLR (S2) button or

the TRANSFER (CLEAR) button.

(The TRANSFER button becomes the CLEAR button when using the

overlay.)

4. Press the STORE button.

• The STORE indicator light turns on.

• The display shows the initial programming mode.

— To exit from Station Programming mode: Press [PROGRAM] or lift the handset.

• You cannot enter a non-existent extension or a floating number.*

• Through System Programming, “VM command DTMF Set” and “Station Hunting

Type” must be programmed to match the operation of your Voice Processing System.

• System Programming — Installation Manual

[106] Station Hunting Type

[114] VM Command DTMF Set

* Floating Number (FN) is a virtual extension number for resources to make it appear to be an extension.

Refer to the Installation Manual.

1

2

4

AUTO DIAL

STORE

3

VM extension number

VTR-

CLR

VTR-xxxx

CLR