Intel Celeron M 390 RH80536NC0291M Fiche De Données
Codes de produits
RH80536NC0291M
Electrical Specifications
26
Datasheet
3.10
Processor DC Specifications
The processor DC specifications in this section are defined at the processor
core (pads) unless noted otherwise. See
for the pin signal definitions and
signal pin assignments.
through
list the DC specifications for the processor and are valid only
while meeting specifications for junction temperature, clock frequency, and input
voltages. The Highest Frequency Mode (HFM) and Super Low Frequency Mode
(SuperLFM) refer to the highest and lowest core operating frequencies supported on
the processor. Active mode load line specifications apply in all states except in the Deep
Sleep and Deeper Sleep states. V
CC,BOOT
is the default voltage driven by the voltage
regulator at power up in order to set the VID values. Unless specified otherwise, all
specifications for the processor are at Tjunction = 100 °C. Care should be taken to read
all notes associated with each parameter.