Panasonic SA-XR50 Mode D’Emploi
5
Step 1
RQT74
87
UT
P
R
IN
DVR/VCR1
Y
P
B
P
R
Y
P
B
P
R
TV IN
DVD IN
COMPONENT VIDEO
FRONT B
CENTER
SURROUND
SPEAKERS (6
∼8Ω) HAUT-PARLEURS
AC IN
∼
R
L
FRONT A
Class 2 Wiring
R
L
R
L BACK
Connecting speakers
Front speakers ( left right)
Place on the left and right of the TV at seated ear height so that there is
good coherency between the picture and sound.
good coherency between the picture and sound.
Center speaker ( )
Place underneath or above the center of the TV. Aim the speaker at the
seating area.
seating area.
Surround speakers ( left right)
Place on the side of or slightly behind the seating area, about one meter
(3 feet) higher than ear level.
(3 feet) higher than ear level.
Surround back speaker ( )
Place behind the seating area, about one meter (3 feet) higher than ear
level.
level.
Subwoofer ( )
The subwoofer can be placed in any position as long as it is at a
reasonable distance from the TV.
Note that some experimentation can yield the smoothest low frequency
performance. Placement near a corner can increase the apparent
output level, but can result in unnatural bass.
reasonable distance from the TV.
Note that some experimentation can yield the smoothest low frequency
performance. Placement near a corner can increase the apparent
output level, but can result in unnatural bass.
Cable
Speaker terminals
Twist
the wire
the wire
FRONT A
Other terminals
Note
If using 4-mm plugs
Do not short-circuit.
( )
( )
Peripheral equipment and cables sold separately unless otherwise indicated.
To connect equipment, refer to the appropriate operating instructions.
To connect equipment, refer to the appropriate operating instructions.
Fully tighten the terminal,
then insert.
then insert.
Front
right
Front
left
Surround
right
Surround
left
Surround
back
Speakers
Speaker
Impedance:
Impedance:
Front A:
6-8 Ω
A and B:
6-8 Ω
Center: 6-8
Ω
Surround: 6-8
Ω
Center
Active
subwoofer
Monaural
connection
cable
connection
cable
Connect this cord after all other cables
and cords are connected.
and cords are connected.
Note
• The included AC power supply cord is
for use with this unit only. Do not use it
with other equipment.
• If the unit is left unplugged for longer
than two weeks, all settings will revert
to the factory settings. Do the settings
again if this occurs.
to the factory settings. Do the settings
again if this occurs.
Household AC outlet
(AC 120 V/60 Hz)
(AC 120 V/60 Hz)
Speakers/
AC power supply cord
AC power
supply cord
(included)
supply cord
(included)