Panasonic KX-P8420 Mode D’Emploi

•

If your network uses both NDS and Bindery, set up NDS first. Setting up 
NDS after Bindery will overwrite Bindery Setup. If your network uses both 
NDS and Bindery, including using NetWare 4.x servers in bindery 
emulation, the KX-P8420 cannot service NDS and bindery emulation 
servers on the same NDS tree.

The Enable PServer mode option must be turned on if you have a Novell 
server connected. You can change the PServer Poll Interval and modify 
either Bindery Setup or NDS Configuration.

•

To enable PServer mode you must first select a frame type. See “Select 
Frames” on 

In initial setup, the KX-P8420 was connected to the network and an NDS 
directory tree, with a Printer, a Print Server, and one or more Print Queue 
objects for KX-P8420 jobs was configured (see 

). You can make any 

changes to that setup through WebSetup. To modify NDS Setup you may 
need permission to browse the NDS tree. If access to the Print Server is 
restricted, you’ll need a login password.

Note that the terms NetWare server, Novell server, and IPX server are in 
common use and are used here interchangeably to mean the server on an 
IPX network running Novell NetWare networking software.

Check the Enable NDS check box.

NDS has already been enabled. Uncheck this box only to remove 
NDS support.

Click Change Trees to open the Add NDS Tree window.

You can have only one NDS tree, so the following process is 
required to change trees.

Select the current NDS tree and click Remove.