Panasonic DMREX79EB Mode D’Emploi
11
RQT9299
Before connection, turn off the mains for all connected equipment and read the appropriate operating
instructions.
BE SURE TO READ THE CAUTION FOR AC MAINS LEAD ON PAGE 3.
BE SURE TO READ THE CAUTION FOR AC MAINS LEAD ON PAGE 3.
Adding a Digital Satellite Receiver: Connecting to a Television and a Digital Satellite
Receiver
Receiver
Aerial cable to the “RF IN” on the digital satellite receiver.
RF coaxial cable from the “RF OUT” on the digital satellite receiver to the “RF IN” on the unit.
RF coaxial cable (included) from the “RF OUT” on the unit to the “RF IN/AERIAL” on the TV.
21-pin Scart cable from the “AV/VCR” on the digital satellite receiver to the “AV2 (EXT)” on the unit.
21-pin Scart cable from the “AV1 (TV)” on the unit to the “AV” on the TV.
21-pin Scart cable from the “AV/TV” on the digital satellite receiver to the “AV” on the TV.
RF coaxial cable from the “RF OUT” on the digital satellite receiver to the “RF IN” on the unit.
RF coaxial cable (included) from the “RF OUT” on the unit to the “RF IN/AERIAL” on the TV.
21-pin Scart cable from the “AV/VCR” on the digital satellite receiver to the “AV2 (EXT)” on the unit.
21-pin Scart cable from the “AV1 (TV)” on the unit to the “AV” on the TV.
21-pin Scart cable from the “AV/TV” on the digital satellite receiver to the “AV” on the TV.
To view digital satellite programmes
Refer to “Watching Digital Satellite Programmes” ( 19)
To record digital satellite programmes
Refer to “Recording from a Digital Satellite Receiver” ( 28)
Refer to “Watching Digital Satellite Programmes” ( 19)
To record digital satellite programmes
Refer to “Recording from a Digital Satellite Receiver” ( 28)
Quick Start Guide
STEP
2
Using a fully wired 21-pin Scart cable
– You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television ( 44).
– You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
– You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
“AV1 Output” in the Setup menu is set to “RGB 1 (without component)” or RGB 2 (without component)”
( 75)
( 75)
– “AV2 Input” settings in the Setup menu ( 75)
When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of power,
even when it is turned off.
[approx. 0.9 W (“Power Save” is set to “On”)]
To save power, unplug it from the household mains socket. This unit consumes a small amount of power,
even when it is turned off.
[approx. 0.9 W (“Power Save” is set to “On”)]
Digital satellite receiver
AV1(TV)
This unit
TV
RF IN/AERIAL
RF IN
AV2 (EXT)
RF OUT
RF IN
DISH INPUT
RF OUT
AV
AV/TV
AV/VCR
AV
HDMI IN
HDMI OUT
1
2
3
4
5
6
HDMI cable
You can enjoy high-quality picture
by adding the HDMI cable connection
by adding the HDMI cable connection
12
HDMI AV OUT
HDMI IN
The RF coaxial cable cannot be
used for showing pictures from the
unit. The unit must be connected
using another method, e.g. 21-pin
Scart cable to show pictures from
the unit on the television set.
used for showing pictures from the
unit. The unit must be connected
using another method, e.g. 21-pin
Scart cable to show pictures from
the unit on the television set.
To the aerial
Digital satellite antenna
12, 78
Additional Connections
After completing the above connections, proceed to the TV Tuning ( 13).
DMR-EX79EB.indb 11
DMR-EX79EB.indb 11
2009/01/14 14:52:46
2009/01/14 14:52:46