Panasonic DMR-E75V Manuel D'Instructions

[4]

≥To continue programming:

Select “New Timer Programme” and repeat steps 2, 3, and 4.

[5]

≥“

” lights on the unit’s display.

not be turned off automatically.
≥You can play a DVD-RAM on DVD, play or record any media on 

VHS even if the timer recording standby mode is activated on DVD.

[6]

≥If the timer recording is started with keeping the unit turned on, 

the unit is not turned off automatically even after the timer 
recording is completed.

∫ To release the unit from recording standby

The unit turns on and “

” goes out.

≥Be sure to press [

, TIMER] before the programme start time to 

put the unit on recording standby. Timer recording will work only if 

“

” is displayed.

∫ To cancel recording when recording has already 

≥You can also press and hold [∫] on the DVD main unit for more 

than 3 seconds to stop recording.

∫ VPS/PDC Function 

(

If a TV programme starts earlier or later from original schedule, 
recording start and stop can synchronize with the actual 
broadcasting.
Conditions for correct operation of the VPS/PDC function:
≥The TV station must broadcast VPS/PDC signals.
≥The programme starting time must be set correctly to the starting 

time listed in the newspaper/magazine.

3, 4] to select 

Note
≥“

” flashes for about 5 seconds when the unit cannot go to timer 

recording standby (non-recordable disc or protected disc, etc.). 
Check the disc carefully.

≥If the unit is not put in the timer recording standby mode at the 

latest 10 minutes before the programmed timer recording starting 

time, the “

” flashes on the unit display. In this case, press 

[

, TIMER] to put the unit in the timer recording standby mode.

≥When recording more than one programme in a row, for DVD-RAM 

the first few seconds, and for DVD-R about the first 30 seconds of 
all programmes from the second one onwards will not be recorded.

≥Even if the unit is in timer recording standby, play starts when you 

press [

1, PLAY] or [DIRECT NAVIGATOR]. Timer recording works 

even during play. 

[RAM]

[1]

A)

¥

: Now recording

W: The programme is 

overlapped.

F: The disc was full. (no 

enough space)

: The TV programme is 

not allowed to record 
by copy-guard.

X: Uncompleted recording (Such as dirty disc)

B)

Recordable

# (Date): The last day of daily or weekly recording.
!:

It may not be possible to record because:

≥the disc is write-protected
≥there is not enough space left
≥the number of possible titles has reached its 

maximum.

[2]

3, 4] to select the programme.

≥You may also select programme by inputting a 2-digit number 

using the numeric buttons.
e.g.:

“5”:

[0] 

)[5]

“15”:

[1] 

)[5]

≥Press [2, 1] to move to the page preceding or following the 

one on display.

[3]

¢, CANCEL/RESET] to delete,

≥You cannot change or delete programmes that are currently 

recording.

≥The timer recording setting screen appears.
≥To continue deleting programmes steps 2–3.

[4]

3, 4, 2, 1] to change and press 

≥To continue changing programmes steps 2–3.

[5]

≥“

” lights on the unit’s display.

not be turned off automatically.
≥You can play a DVD-RAM on DVD, play or record any media on 

VHS even if the timer recording standby mode is activated on DVD.

[6]

≥If the timer recording is started with keeping the unit turned on, 

the unit is not turned off automatically even after the timer 
recording is completed.

For your reference
≥Programmes that failed to record are displayed grey. They are 

automatically deleted from the timer recording list at 4 a.m. two 
days later.

W
F

X

W
F

X

---

---

A

B

75VGN.book  27 ページ  ２００４年７月２１日　水曜日　午前１１時５４分