Panasonic DMR-E75V Manuel D'Instructions

≥DVD-Video:

You can play DVD-Video multi channel surround by digitally connecting an amplifier 
equipped with a Dolby Digital, DTS or MPEG decoder.

≥DVD-Audio:

This unit plays DVD-Audio in 2 channels. You cannot play multi channel surround sound.

–

≥You cannot directly connect to the unit. Connect through the amplifier etc.

–

≥If you have a regular television (CRT: Cathode Ray Tube) we recommend using the Scart 

terminal. You can enjoy high-quality RGB video from this unit by connecting to an RGB 
compatible television.
If you have an LCD/plasma television or LCD projector compatible with progressive scan, 
connect through the component video terminals for high-quality progressive video.
If you have a CRT television that is compatible with progressive scan, we cannot 
recommend progressive output as some flickering can occur.

9, 14

≥All Panasonic television that have 625 (576)/50i · 50p, 525 (480)/60i · 60p input terminals 

are compatible. Consult the manufacturer if you have another brand of television.

–

≥You cannot play DVD-Video if their region number does not include “4” or “ALL”.

–

≥The DVD-Video region number indicates the disc conforms to a standard. You cannot 

play discs that do not have a region number.

–

≥This unit records and plays DVD-R. However, you cannot record onto DVD-R discs that 

are finalized. 

≥This unit also records and plays 1k–4k recording speed DVD-R discs.
≥This unit does not record or play DVD-RW.

–

≥You can play CD-R and CD-RW on this unit that are created using a compatible format.
≥You cannot write to a CD-R or CD-RW with this unit.

≥Most commercially sold video cassettes and DVD are copy protected; therefore, 

recording is usually not possible.

–

≥You can play on DVD-R compatible players after finalizing the disc on this unit, however, 

due to the condition of the recording, play may not be possible.

≥You can write to the disc approximately 100,000 times depending upon the conditions of 

use.

–

≥You cannot record digital signals. The digital audio terminals on this unit are for output 

only.

–

≥You can record if using the PCM signal. When recording DVD, change the “Digital Audio 

Output” settings to the following in the SETUP menu.
–PCM Down Conversion:

On

–Dolby Digital/DTS/MPEG: PCM
However, only as long as digital recording from the disc is permitted and the recording 
equipment is compatible with a sampling frequency of 48 kHz.

≥You cannot record MP3 signals.

–

≥With DVD-RAM/cassette tape, you can. Just press [AUDIO].
≥With DVD-R, you cannot. Change before recording with the “Bilingual Audio Selection” in 

the SETUP menu.

24, 57

75VGN.book  65 ページ  ２００４年７月２１日　水曜日　午前１１時５４分