Panasonic DMREX88 Mode D’Emploi

81

RQT9078

 Notes

 When using 8 cm DVD-RAM or 8 cm DVD-R, remove the 

disc from the cartridge.

 It is not possible to record or play continuously from one 

side of a double sided disc to the other. You will need to 
eject the disc and turn it over.

When the card indicator (“SD”) on the unit’s display is fl ashing, the card 
is being read from or written to. Do not turn off the unit or remove the 
card.
Such action may result in malfunction or loss of the card’s contents.
 Inserting foreign objects can cause a malfunction.

Handle discs by the edges to avoid inadvertently scratching or getting 
oil from your fi ngers on the disc. Do not touch the signal surface of 
discs (the shiny side) or the terminal surface (the metal part) of SD 
cards.

Discs are not indestructible and occasionally dirt or condensation 
may appear. Clean by gently wiping with a soft, dry lint-free cloth in a 
straight line from the centre of the disc to the edge of the disc.
Return discs and SD cards to their cases when not in use; this helps to 
protect against scratches and dirt.

 Do not place or store discs and cards in the following locations:

–

Direct sunlight

–

Very dusty or humid areas

–

Near a heat source

–

Places that undergo extreme shifts in temperature (condensation 
can occur)

–

Where static electricity or electromagnetic waves occur

 Keep the Memory Card out of reach of children to prevent 

swallowing.

 Discs that are not perfectly circular in shape
 Warped discs, which may not balance properly in your unit, causing 

improper operation or damage to the unit

 Cracked discs
 Discs with exposed adhesive (from removed stickers or labels, such 

as may occur with rental discs or improperly cared-for discs that were 
previously labeled or re-labeled)

Press on the centre 
of the card.

Pull it straight out.

[RAM] Use cartridges to protect them from scratches and dirt.

[EX88]   

   Press [

 OPEN/CLOSE] to open the tray. 

–  Insert a disc.

   Press [

 OPEN/CLOSE] to close tray. 

Insert label-up.

Automatic drive select function
[RAM] [Only for discs with the write-protect tab on the cartridge set to 
“PROTECT” (

 68, Setting Protection)]

[DVD-V] [VCD] [CD]
 If the unit is recording to the HDD or stopped, it automatically 

switches to the DVD drive when a disc is inserted.

 If you eject a disc and close the disc tray, the HDD drive is 

automatically selected.

Automatic drive select function
 If you insert an SD card while the unit is stopped, the “SD Card” 

screen is displayed. Select an item and press [OK] to switch to the 
SD drive (

 

38, 62).

 If you remove an SD card, the HDD drive is automatically selected.

Insert the card label up with 
the cut-off corner on the right.

ADAPTER

Press on the centre of 
the card until it clicks into 
place.

If you are using a 
miniSD card,or a 
microSD card, insert 
it into the adaptor that 
comes with the card.
Insert and remove this 
adaptor from the unit.

e.g., miniSD

 Before inserting any USB memory to this unit, ensure that the data 

stored therein has been backed up.

 Check the orientation of the USB connector and insert it straight in.
 Insert an USB device while the unit is stopped, so the “USB device” 

screen is displayed. Select an item and press [OK] to switch to the 
USB-related operations (

 

 38, 62).

Removing the USB memory
 Complete all USB-related operations and pull the USB memory 

straight out.

 If a USB memory being accessed is pulled out, then the data may be 

damaged.

DMR-EX78_88EB.indb   81

DMR-EX78_88EB.indb   81

2008/02/14   12:19:56

2008/02/14   12:19:56