Panasonic KX-HNC600 Mode D’Emploi
5
Attach the safety wire to the wall.
R Place the ring of the safety wire (A)
R Place the ring of the safety wire (A)
on the wall.
R Place the washer (B) on top of the
ring of the safety wire.
R Tighten the screw (C) for the safety
wire on top of the washer.
1
2
3
Note:
R Attach the safety wire while it is bent.
R Attach the safety wire high on the wall
R Attach the safety wire while it is bent.
R Attach the safety wire high on the wall
so that the camera does not strike
anyone in the event the camera
detaches from the wall.
anyone in the event the camera
detaches from the wall.
R Do not hang from the camera or stand.
6
Connect the DC cable to the AC adaptor.
R Pull the DC cable indoors, and connect
R Pull the DC cable indoors, and connect
the DC cable plug (A) to the AC
adaptor plug (B).
adaptor plug (B).
R Connect the AC adaptor (C) to the
power outlet.
1
Outdoors
2
Indoors
3
2
1
1
2
Note:
R Use only the supplied Panasonic AC
R Use only the supplied Panasonic AC
adaptor PNLV236.
R Be sure to connect the DC cable plug
and AC adaptor plug indoors.
Note about power connections
AC adaptor connection
R The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
Power failure
R The camera will not work during a power
failure.
20
For assistance, please visit http://shop.panasonic.com/support
Setup
HNC600_(en_en)_0615_ver.130.pdf 20
2015/06/16 21:06:05