Panasonic KXHNC800 Mode D’Emploi
Connections
1
Insert the AC adaptor plug
(A) firmly into the camera’s
micro-USB connector.
(A) firmly into the camera’s
micro-USB connector.
2
Connect the AC adaptor (B)
to the power outlet.
to the power outlet.
3
Insert a microSD card
(user-supplied; C) into the
camera’s microSD card slot.
(This is not necessary if you
do not want to record camera
images.)
(user-supplied; C) into the
camera’s microSD card slot.
(This is not necessary if you
do not want to record camera
images.)
B
C
A
Note:
R Use only the supplied AC adaptor S006AKU0500100.
R To remove the microSD card, push in the microSD card and then
R Use only the supplied AC adaptor S006AKU0500100.
R To remove the microSD card, push in the microSD card and then
remove it.
Note about power connections
AC adaptor connection
R The AC adaptor must remain connected at all times. (It is normal for
R The AC adaptor must remain connected at all times. (It is normal for
the adaptor to feel warm during use.)
R The AC adaptor should be connected to a vertically oriented or
floor-mounted AC outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of the adaptor may cause it
to become disconnected.
ceiling-mounted AC outlet, as the weight of the adaptor may cause it
to become disconnected.
Power failure
R The camera will not work during a power failure.
R The camera will not work during a power failure.
16
For assistance, please visit http://shop.panasonic.com/support
Setup
HNC800_(en_en)_0530_ver.304.pdf 16
2017/05/31 14:19:42