Panasonic KXFC278FX Mode D’Emploi

Setting the connecting tone
MBNM7NM6N

If you often have trouble when sending faxes, this feature allows you to hear
connecting tones: fax tone, ring back tone and busy tone. You can use those
tones to confirm the status of the other party’s machine.
M0N “OFF”: Deactivates this feature.
M1N “ON” (default): You will hear connecting tones.

Note:
R If the ring back tone continues, the other party’s machine may not be a fax

machine or may have run out of paper. Check with the other party.

R The connecting tone volume cannot be adjusted.

Changing the receiving mode
in the auto answer setting
MBNM7NM7N

M1N “TAM/FAX” (default): Telephone Answering Machine/Fax mode (page 31)
M2N “FAX ONLY”: Fax only mode (page 32)

Changing the TEL/FAX
delayed ring count
MBNM7NM8N

If you use an extension telephone when this unit is in TEL/FAX mode, select
the desired number of times the extension telephone rings before the unit
answers the call.
M1N “1”, M2N “2” (default), M3N “3”, M4N “4”, M5N “5”, M6N “6”, M7N “7”, M8N
“8”, M9N “9”
See page 31 for details.

Resetting advanced features
to their default settings
MBNM8NM0N

M0N “NO” (default)
M1N “YES”
To reset the advanced features:
1. MMENUN A MBNM8NM0N
2. Press M1N to select “YES”. A MSETN A MSETN

Note:
R The ECM selection (feature #68 on page 43) will not be reset.

*1 This setting can be changed individually for the base unit and the cordless handset.

– To set the cordless handset LCD display contrast, see page 45.

MDNMCN

MihN

1.
2. Press MCN or MDN to select the desired top-menu.

A 

3. Press MCN or MDN to select the desired item in

sub-menu 1. A 
R In some cases, you may need to select from

sub-menu 2. A 

4. Press MCN or MDN to select the desired setting. A

R This step may vary depending on the feature

being programmed.

R To exit the operation, press M

N.

Note:
R For other top-menus, please refer to each chapter.
R The current item or setting is highlighted on the

display.

44