Panasonic DMC-LX100 Mode D’Emploi

Page de 332
232
SQW0024
Wi-Fi
Operating the camera by connecting it to a smartphone
Changing the connection method
To change the connection method, press 
the [DISP.] button and select the connection 
method.
 
When connecting with [Via Network]
(On the camera)
  Select [Via Network] and press [MENU/SET]
 •Connect the camera to a wireless access point by following the connection method 
(→264)
.
(On your smartphone)
  Set Wi-Fi function to “ON”
  Select the wireless access point you connected to the camera, and set
  Start “Image App” 
 
When connecting with [Direct]
(On the camera)
  Select [Direct] and press [MENU/SET]
 •Select [Wi-Fi Direct] or [WPS Connection], and connect the camera to the smartphone by 
following the connection method 
.
(On your smartphone)
  Start “Image App” 
Closing the connection
After use, close the connection with the smartphone.
(On the camera)
1
Press [Wi-Fi] button
(On the recording standby screen, you can also close the connection by pressing 
 →   [Setup] → [Wi-Fi] → [Wi-Fi Function] → [Yes].)
2
Select [Terminate the Connection]
 •A confirmation screen is displayed. Select [Yes] and press [MENU/SET].
(On your smartphone)
3
Close “Image App”
<Using an iOS device>
From the “Image App” screen, press the home button on the smartphone to close the app
<Using an Android device>
From the “Image App” screen, press the back button on the smartphone twice to close the app