Panasonic DMC-LX100 Mode D’Emploi

Page de 332
299
SQW0024
Others
Message displays
The following explains the meaning of major messages displayed on the monitor or 
viewfinder, and how to respond to them.
 
Memory cards
[Memory Card Error]     [Format this card?]
 •The card format cannot be used with this camera.
→  Save needed data on a computer or other device, and then use [Format] on the camera. 
[Insert SD card again]     [Try another card]
 •Access to card has failed.
→  Insert card again.
 •Try with a different card.
[Read Error] / [Write Error]     [Please check the card]
 •Data read has failed.
→  Check whether card has been inserted correctly 
 •Data write has failed.
→  Turn off the camera and remove the card. Reinsert the card and turn the camera on again. 
 •Card may possibly be damaged.
→  Try with a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the card]
 •The speed class of a required card varies depending on [Rec Format] and [Rec Quality] of a motion 
picture. Be sure to use a card of the recommended speed class. For details, refer to “About the 
motion picture recording and speed class” 
.
→  If recording stops even when using a card of the recommended speed class 
(→25)
, the data 
writing speed has dropped. If this happens, we recommend backing up the data on the memory 
card and formatting it 
.
[Memory Card Error]     [This memory card cannot be used]
 •Not compatible with the camera. Use a compatible card.
[Cannot record due to incompatible format(NTSC/PAL) data on this card.]
 •Format the card after saving necessary data on a PC etc. 
→  Insert a different card.