Panasonic DMC-LX100 Mode D’Emploi

318

SQW0024

Others

Q&A  Troubleshooting

■

 •Use within the communication range of the wireless LAN network.

 •Connection types and security setting methods are different depending on the wireless access 

point.

→  Refer to the operating instructions of the wireless access point.

 •When the radio waves are interrupted, the condition may improve by moving the location or 

changing the angle of the wireless access point.

 •When this unit is placed on a metal table or shelf, the connection may not be established easily 

because the camera is affected by radio waves. Use the camera away from metal surfaces.

 •It may not automatically connect when the network SSID of the wireless access point is set not to 

broadcast.

→  Set the network SSID of the wireless access point to broadcast.

 •Is any device, such as microwave oven, cordless phone, etc., that uses 2.4 GHz frequency 

operated nearby?

→  Radio waves may get interrupted when used simultaneously. Use them sufficiently away from 

the device.

 •Is the 5 GHz/2.4 GHz switchable wireless access point connected to other equipment using the 

5 GHz band?

→  The use of a wireless access point that can use 5 GHz/2.4 GHz simultaneously is 

recommended. It cannot be used simultaneously with this camera if it is not compatible.

 •When the battery indicator is flashing red, the connection with other equipment may not start or the 

connection may be disrupted. (A message such as [Communication error] is displayed.)

 •Perform [Reset Wi-Fi Settings] in the [Setup] menu.