Panasonic KXTG1313SA Mode D’Emploi

5

The charger can be mounted on the wall, if required.
L

Use only the supplied Panasonic AC adaptor PQLV209CE.

Note:
L

Never install telephone wiring during a lightning storm.

L

Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the 
weight of the adaptor may cause it to become disconnected.

During a power failure
The unit will not work during a power failure. We recommend connecting a 
corded-type telephone (without AC adaptor) to the same telephone line or 
to the same telephone line jack, if you have such a telephone jack in your 
house.

Location
For maximum distance and noise-free operation, place your base unit:
− away from electrical appliances such as TVs, radios, personal 

computers, or other phones.

− in a convenient, high, and central location.

Important:
L

Use the supplied rechargeable batteries (Part No. HHR-55AAAB).

L

When installing the batteries:
− Wipe the battery ends (S, T) with a dry cloth.
− Avoid touching the battery ends (S, T) or the unit contacts.
− Confirm correct polarities (S, T).

L

If the handset does not automatically turn on after installing batteries, 
press {ih} for about 1 second, or place the handset on the base unit 
or charger.

Insert the batteries negative (T) end first. Close the handset cover.

Available for:
KX-TG1313

(220–240 V AC, 50 Hz)

Hooks

25.2 mm

Screws
(Not supplied)

TG1311_1313SA(e).book  Page 5  Monday, September 29, 2008  11:18 AM