Panasonic CZRTC4 Mode D’Emploi
3
(EN)
Note:
z
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
z
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
z
FCC Caution: To assure continued compliance, follow the attached installation instructions.
Any changes or modifi cations not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Any changes or modifi cations not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Model No.
CZ-RTC4
Dimensions
(H) 120 mm × (W) 120 mm × (D) 20 + 4.75 mm
Weight
160 g
Temperature/
Humidity range
Humidity range
0 ˚C to 40 ˚C / 20 % to 80 % (no condensation)
*Indoor use only.
*Indoor use only.
Power Source
DC16 V (supplied with indoor unit)
Clock
Precision
± 30 seconds/month (at normal temperature 25 ˚C)
*Adjust periodically.
*Adjust periodically.
Holding
time
time
24 hours (when fully charged)
*Approx. 8 hours are required for full charge.
*Approx. 8 hours are required for full charge.
Number of
connected indoor
units
connected indoor
units
Up to 8 units
Specifi cations
ENGLISH
業務用リモコン_CZ-RTC4_簡単ガイド.indd 3
業務用リモコン_CZ-RTC4_簡単ガイド.indd 3
2015/02/20 8:36:34
2015/02/20 8:36:34