Panasonic KXHNC800 Mode D’Emploi
Setting up the
camera (initial
setup)
camera (initial
setup)
Confirm the following before you
begin.
– Make sure you have installed
begin.
– Make sure you have installed
the [Home Network] app on
your mobile device
your mobile device
– Make sure the camera is
located within range of your
wireless router
wireless router
– Make sure your mobile device
is connected to your wireless
router
router
– Make sure your mobile device
can connect to the Internet
– Make sure you know the
network name (SSID) and
password assigned to your
wireless router
password assigned to your
wireless router
Initial setup (for iPhone, iPad
users)
users)
R Do not perform this procedure
R If your mobile device is
already registered to a hub
and you want to use your
camera by itself, see
“Information for current hub
users”, page 22.
and you want to use your
camera by itself, see
“Information for current hub
users”, page 22.
1
Plug in the camera and wait
about 1 minute for the
camera’s LED to light in green.
R If the LED does not light in
about 1 minute for the
camera’s LED to light in green.
R If the LED does not light in
green, or if you experience
trouble during this
procedure, reset the
camera (page 25) and
then repeat this procedure.
trouble during this
procedure, reset the
camera (page 25) and
then repeat this procedure.
2
Start the [Home Network]
app.
R If prompted, follow the
app.
R If prompted, follow the
on-screen instructions and
select the appropriate
region/country.
select the appropriate
region/country.
3
Tap [HD Camera].
4
Tap [Set up the HD Camera].
5
When prompted, press the
MSETUPN button on the back
MSETUPN button on the back
For assistance, please visit http://shop.panasonic.com/support
19
Setup
HNC800_(en_en)_0902_ver.220.pdf 19
2016/09/05 17:54:31