Panasonic KXFC195E Mode D’Emploi
7. Programmable Features
53
Code #44: Setting the memory reception alert
RECEIVE ALERT
=ON
=ON
[
±]
To alert you with a beeping sound when a
received fax document is stored into memory
due to some existing problem.
The slow beeps will continue until you clear the
printing problem and make sure the unit is
supplied with enough paper to print the stored
document.
“ON” (default): You will be alerted to a reception
problem by a beeping sound.
“OFF”: Deactivates this feature.
received fax document is stored into memory
due to some existing problem.
The slow beeps will continue until you clear the
printing problem and make sure the unit is
supplied with enough paper to print the stored
document.
“ON” (default): You will be alerted to a reception
problem by a beeping sound.
“OFF”: Deactivates this feature.
Code #46: Setting friendly reception
FRIENDLY RCV
=ON
=ON
[
±]
To receive a fax automatically when you answer
a call using the base unit and hear a fax calling
tone (slow beep).
“ON” (default): You do not have to press
{
a call using the base unit and hear a fax calling
tone (slow beep).
“ON” (default): You do not have to press
{
FAX/START} for fax reception.
“OFF”: You have to press {FAX/START} for fax
reception.
reception.
Code #47: Setting the fax voice guidance
FAX GUIDANCE
=ON
=ON
[
±]
If you wish to hear voice guidance, activate this
feature.
“ON” (default): You will hear voice guidance.
“OFF”: Deactivates this feature.
“ERROR”: To hear voice guidance only when fax
transmission/reception fails.
feature.
“ON” (default): You will hear voice guidance.
“OFF”: Deactivates this feature.
“ERROR”: To hear voice guidance only when fax
transmission/reception fails.
Code #51: Setting the mailbox 1 password
BOX1 PASSWORD
ID=
ID=
To prevent other users from retrieving your
messages, program a password for mailbox 1.
messages, program a password for mailbox 1.
1. Press {MENU}.
2. Press {#}, then {5}{1}.
3. Enter a 3-digit number except a number
using digits 0 or 7.
L
The default ID is “555”.
4. Press {SET}.
5. Press {MENU}.
Code #52: Setting the mailbox 2 password
BOX2 PASSWORD
ID=
ID=
To prevent other users from retrieving your
messages, program a password for mailbox 2.
messages, program a password for mailbox 2.
1. Press {MENU}.
2. Press {#}, then {5}{2}.
3. Enter a 3-digit number except a number
using digits 0 or 7.
L
The default ID is “555”.
4. Press {SET}.
5. Press {MENU}.
Code #54: Changing the recording time for
your TAD/FAX greeting message
your TAD/FAX greeting message
GREETING TIME
=16s
=16s
[
±]
“16s” (default): Maximum recording time is 16
seconds.
“60s”: Maximum recording time is 60 seconds.
See page 43 for details.
seconds.
“60s”: Maximum recording time is 60 seconds.
See page 43 for details.
Code #55: Greeting message for mailbox 1
BOX1 GREETING
CHECK
CHECK
[
±]
See page 47 for details.
Code #56: Greeting message for mailbox 2
BOX2 GREETING
CHECK
CHECK
[
±]
See page 47 for details.
Code #60: Setting the message transfer
MESSAGE TRANSFER
=OFF
=OFF
[
±]
To transfer recorded incoming messages to
another telephone (page 48), activate this
feature and program the transfer telephone
number.
another telephone (page 48), activate this
feature and program the transfer telephone
number.
1. Press {MENU}.
2. Press {#}, then {6}{0}.
3. Press {A} or {B} repeatedly to select “ON”.
4. Press {SET}.
5. Enter the transfer telephone number.
6. Press {SET}.
7. Press {MENU}.
Code #61: Checking, recording or erasing the
transfer greeting message
transfer greeting message
TRNS-GREETING
CHECK
CHECK
[
±]
See page 48 for details.
FC195E.book Page 53 Wednesday, March 5, 2003 7:15 PM