Panasonic KXFC225E Mode D’Emploi
7. Programmable Features
52
7.2.2 Time settings
Alarm
An alarm will sound for 3 minutes at the set time once or
daily. Set the date and time beforehand (page 19).
An alarm will sound for 3 minutes at the set time once or
daily. Set the date and time beforehand (page 19).
1. {j/OK} i “
Handset Setup” i {>}
2. “
Time Settings” i {>}
3. “
Alarm” i {>} 2 times
4. Select an alarm mode. i {>}
5. Enter the desired hour and minute. i {j/OK}
6. Select the desired ringtone. i {>}
7. “
Save” i {>} i {ih}
Note:
L
To stop the alarm, press any dial key.
L
When in talk or intercom mode, the alarm will not
sound until the call has ended.
sound until the call has ended.
L
If you select “
Once”, the setting will change to “Off”
after the alarm sounds.
7.2.3 Display setup
Display language
1. {j/OK} i “
Handset Setup” i {>}
2. “
Display Setup” i {>}
3. “
Select Language” i {>}
4. Select the desired language. i {>} i {ih}
Note:
L
If you select a language you cannot read, press
{ih}
{ih}
, press {j/OK}, press {^} 3 times, press
{>}
, press {V} 2 times, press {>}, press {V}, press
{>}
, select the desired language, press {>}, then
press {ih}.
7.2.4 Call options
Setting call restriction
You can restrict selected cordless handsets/base unit
from dialling certain numbers. You can assign up to 6
phone numbers to be restricted, and select which
cordless handsets/base unit will be restricted. Storing
area codes here will prevent the restricted cordless
handsets/base unit from dialling any phone number in
that area code.
You can restrict selected cordless handsets/base unit
from dialling certain numbers. You can assign up to 6
phone numbers to be restricted, and select which
cordless handsets/base unit will be restricted. Storing
area codes here will prevent the restricted cordless
handsets/base unit from dialling any phone number in
that area code.
1. {j/OK} i “
Base Unit Setup” i {>}
2. “
Call Options” i {>}
3. “
Call Restrict” i {>}
4. Enter “
0000” (default base unit PIN).
L
If you forget your PIN, contact our service
personnel.
personnel.
5. To restrict the base unit, press {0}.
To restrict a cordless handset, press the desired
cordless handset number.
cordless handset number.
L
All the registered cordless handset numbers will
be displayed.
be displayed.
L
Flashing numbers indicate call restriction is
turned ON for the corresponding cordless
handset/base unit.
turned ON for the corresponding cordless
handset/base unit.
L
To turn call restriction OFF for a cordless
handset/base unit, press the number again. The
number will stop flashing.
handset/base unit, press the number again. The
number will stop flashing.
6. {j/OK}
7. Select a memory location. i {>}
8. Enter the phone number or area code to be restricted
(up to 8 digits). i {j/OK} i {ih}
L
To erase a restricted number, press {C/T}.
“
Off”
Turns alarm OFF. Press {>} again,
then press {ih} to finish.
then press {ih} to finish.
“
Once”
The alarm sounds once at the set time.
Enter the desired day and month.
Enter the desired day and month.
“
Daily”
An alarm sounds daily at the set time.
FC225E-PFQX2478ZA-en.book Page 52 Wednesday, May 24, 2006 1:53 PM