Panasonic KXTG8321FX Mode D’Emploi

Page de 68
Preparation
15
Charger
The charger can be mounted on the wall, 
if required.
L
Use only the supplied Panasonic AC 
adaptor PQLV209CE.
Note:
L
The AC adaptor must remain 
connected at all times. (It is normal for 
the adaptor to feel warm during use.)
L
The AC adaptor should be connected 
to a vertically oriented or floor-
mounted AC outlet. Do not connect 
the AC adaptor to a ceiling-mounted 
AC outlet, as the weight of the adaptor 
may cause it to become disconnected.
During a power failure
The unit will not work during a power 
failure. We recommend connecting a 
corded-type telephone (without AC 
adaptor) to the same telephone line or to 
the same telephone line jack, if you have 
such a telephone jack in your house.
If you subscribe to a DSL/ADSL 
service
Please attach a DSL/ADSL filter (contact 
your DSL/ADSL provider) to the 
telephone line between the base unit 
and the telephone line jack in the event 
of the following:
– noise is heard during conversations.
– Caller ID features do not function 
properly.
Battery installation and 
replacement
Important:
L
Use the supplied rechargeable 
batteries (Part No. HHR-55AAAB).
L
When installing the batteries:
– Wipe the battery ends (S, T) with 
a dry cloth.
– Avoid touching the battery ends 
(S, T) or the unit contacts.
– Confirm correct polarities (S, T).
L
When replacing the batteries:
– USE ONLY rechargeable Ni-MH 
batteries AAA (R03) size.
– Do NOT use Alkaline/Manganese/
Ni-Cd batteries.
– We recommend using the 
Panasonic rechargeable batteries 
noted on page 6, 8.
Available for:
KX-TG8302
(220-240 V AC, 
 50 Hz)
25.4 mm
Screws
A
Hooks
B
To telephone line
DSL/ADSL filter
TG8301-8321FX(e-e).book  Page 15  Thursday, April 3, 2008  1:04 PM