Panasonic KXTCD210G Mode D’Emploi
–
2
–
Base unit
Displays
Display icons
Various icons appear on the handset display to indicate the current status of the unit.
A {x} (Page)
B Charge contact
B Charge contact
bA
B
w
Within range of a base unit
L
When flashing: Handset is
searching for base unit. (out
of range of base unit, handset
is not registered to base unit,
no power on base unit)
searching for base unit. (out
of range of base unit, handset
is not registered to base unit,
no power on base unit)
L
Handset is accessing base unit.
(intercom, paging, changing
base unit settings, etc.)
(intercom, paging, changing
base unit settings, etc.)
k
Handset is on an outside call.
o
Call bar is on.
5
Battery strength
[VE]
Voice enhancer is set to high or
low tone.
low tone.
[N]
Night mode is on.
[X]
Key lock is on.
[2]
Handset number: The left icon
shows handset 2 example.
shows handset 2 example.
-2-
Base unit number: The left icon
shows base unit 2 example.
shows base unit 2 example.
F
New SMS message received
(SMS users only)
(SMS users only)
[Besetzt] Line is being used by another
handset.
TCD210G_QG(e-g).fm Page 2 Thursday, December 16, 2004 11:01 AM