Panasonic KXFL511E Manuel D'Instructions

“ON” (default): The unit will fit received 
documents onto your recording paper.
“OFF”: The unit will print the original size.

LCD CONTRAST
=NORMAL

[

±]

“NORMAL” (default): For normal contrast.
“DARKER”: Used when the display contrast is too 
light.

FAX ACTIVATION
=ON

[

±]

If you use an extension telephone and wish to 
use it to receive a fax, activate this feature and 
program the activation code.

L

This code is also used to receive a voice 
message and a fax in the same call (page 
33).

1. Press {MENU}.

2. Press {#}, then {4}{1}.

3. Press {A} or {B} repeatedly to select “ON”.

4. Press {SET}.

5. Enter your code from 2 to 4 digits, using 0–9, 

{*}

 and {#}.

L

The default code is “;#9”.

L

Do not enter “0000”.

6. Press {SET}.

7. Press {MENU}.

RECEIVE ALERT
=ON

[

±]

To alert you with a beeping sound when a 
received fax document is stored into memory 
due to some existing problem.
The slow beeps will continue until you clear the 
printing problem and make sure the unit is 
supplied with enough paper to print the stored 
document.
“ON” (default): You will hear a beeping sound.
“OFF”: Deactivates this feature.

FRIENDLY RCV
=ON

[

±]

To receive a fax automatically when you answer 
a call and hear a fax calling tone (slow beep).
“ON” (default): You do not have to press {FAX 
START} for fax reception.

“OFF”: You have to press {FAX START} for fax 
reception.

ECM SELECTION
=ON

[

±]

This feature is available when the 
transmitting/receiving fax machines are ECM 
compatible.
“ON” (default): To send a fax even if there is static 
interference on the telephone line.
“OFF”: Deactivates this feature.

CONNECTING TONE
=ON

[

±]

If you often have trouble when sending faxes, 
this feature allows you to hear connecting tones; 
fax tone, ring back tone and busy tone. You can 
use those tones to confirm the status of the other 
party’s machine.

L

If the ring back tone continues, the other 
party’s machine may not be a facsimile or 
may have run out of paper. Check with the 
other party.

L

The connecting tone volume cannot be 
adjusted.

“ON” (default): You will hear connecting tones.
“OFF”: Deactivates this feature.

TONER SAVE
=OFF

[

±]

“ON”: The toner cartridge will last longer.
“OFF” (default): Deactivates this feature.

SET DEFAULT
RESET=NO

[

±]

To reset the advanced features:

1. Press {MENU}.

2. Press {#}, then {8}{0}.

3. Press {A} or {B} repeatedly to select “YES”.

4. Press {SET}.

5. Press {SET} again.

6. Press {MENU}.

FL511E.book  Page 39  Monday, June 30, 2003  5:55 PM