Panasonic DP-C406 Mode D’Emploi
Chapter 2 Basi
c Fax Transmission
31
Transmission with Destination Monitoring
Select “Monitor” on the Touch Panel Display to obtain a dial tone. This feature is called “On-hook
dialling”. To monitor the status of a remote station, follow the steps below.
dialling”. To monitor the status of a remote station, follow the steps below.
z
This function is not available when the Function Parameter “137 Re-enter Direct Dial” (Fax/Email Settings >
Fax Parameters) is set to “Valid”.
Fax Parameters) is set to “Valid”.
1
Place original(s).
z
If the Platen Glass is used, only one page
can be transmitted at a time.
can be transmitted at a time.
z
Refer to Placing Originals (See page 14).
2
Press the Fax key.
3
Select “Monitor”.
The Monitor screen appears, and you will hear
a dialling tone through the monitor speaker.
a dialling tone through the monitor speaker.
4
Enter the fax number of the
destination.
destination.
z
When the Function Parameter “136 Restrict
Direct Dial” is set to “Valid”, manual input of
fax numbers is not available. Select a
destination from the “Address Book”.
Direct Dial” is set to “Valid”, manual input of
fax numbers is not available. Select a
destination from the “Address Book”.
5
When you hear a beep, press the
Start key.
Start key.
z
For instructions on how to cancel a
transmission, refer to Cancelling a
Communication (see page 53).
transmission, refer to Cancelling a
Communication (see page 53).
z
Press the Reset key to return the machine
to the initial screen of the current active
mode.
to the initial screen of the current active
mode.
Raises the monitor volume.
Lowers the monitor volume.
Select once to recall the last
dialled fax number.
Select twice to insert a pause
(dialling interval).
dialled fax number.
Select twice to insert a pause
(dialling interval).