Panasonic pv-dr2714 Mode D’Emploi

• When    appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by 

the unit or the disc.

DUBBING
 
                VCR→DVD
                 EP  XP

•  Insert a cassette containing material to be dubbed.
•  Select Audio mode. (See page 33.)

Sub Display

•  When using a cartridge style disc, confirm that it is not rewrite 

prohibited. 

•  Be sure there is enough space on the disc to accommodate the 

dubbing.

•  Place into Record mode.
•  Disengage the disc protect setting.

You can specify the position to start transfer (dubbing) of the

program recorded on the tape to the disc*

1

.

*

1

 Only DVD-RAM and non-finalized DVD-R discs can be used for transfer 

(dubbing) from a tape.

•  Copy protected VHS tapes cannot be dubbed to a disc.

„

• Turning unit ON/OFF by pressing POWER.
• Stopping transfer (dubbing) by pressing STOP.
• Selecting input mode by pressing INPUT.
• Changing channels.

-

 During dubbing, you can select and watch TV stations using 

NUMBER keys and Channel ▲▼ keys. To switch back to the 
dubbing picture, press DVD or VCR. If it is the dubbing picture, CH is 
not displayed.

„

Press STOP.
• When playback (source) side ends and unit enters Stop mode, 

or, if dubbing is stopped due to an error, a message will briefly 

appear.

•  While Manual Dubbing (Tape → DVD) is activated, timer recording 

cannot be started.

•  When the transfer (dubbing) is not started or not executed, the 

“DUBBING” indicator blinks for about 7 seconds. Check if the unit is 
properly prepared.

•  When a Copy-guarded tape is inserted, the message appears on the 

display and the recording stops on the spot.