Toshiba 49" Toshiba XUHD WLAN TV Instructions De Sécurité Importantes

English   - 13 -

Recorded programmes are split into 4GB partitions. 

If the writing speed of the connected USB disk is not 

sufficient, the recording may fail and the timeshifting 

feature may not be available.

It is recommended to use USB hard disk drives for 

recording HD programmes.

Do not pull out the USB/HDD during a recording. This 

may harm the connected USB/HDD.

If the AC cord is unplugged while there is an active 

USB-recording timer setting, it will be cancelled.

Multipartition support is available. A maximum of two 

different partitions are supported. The first partition 

of the USB disk is used for USB Recording ready 

features. It also must be formatted as the primary 

partition to be used for the USB Recording ready 

features.

Some stream packets may not be recorded because 

of signal problems, as a result sometimes videos may  

freeze during playback.

Record, Play, Pause, Display (for playlist dialogue) keys 

can not be used when teletext is on. If a recording starts 

from timer when teletext is on, teletext is automatically 

turned off. Also teletext usage is disabled when there 

is an ongoing playback.

While recording a programme in the background you 

can use menu options, switch to another source or use 

Media Browser functions, such as viewing pictures, 

playing video and music files, and even play back the 

ongoing recording.

Press 

Pause button while watching a broadcast to 

activate timeshifting mode. In timeshifting mode, the 

programme is paused and simultaneously recorded 

to the connected USB disk.
Press 

Play button again to resume the paused 

programme from where you stopped. Press the 

Stop 

button to stop timeshift recording and return to the 

live broadcast.
Timeshift cannot be used while in radio mode.
You can use the timeshift fast reverse feature after 

resuming normal playback or fast forward option.

Press 

Record button to start recording an event 

instantly while watching a programme. You can press 

Record button on the remote control again to record 

the next event after selecting the next programme 

from within the EPG. Press 

Stop button to cancel 

instant recording. 
You can not switch broadcasts during the recording 

mode. While recording a programme or during the 

timeshifting, a warning message appears on the screen 

if your USB device speed is not sufficient.

Select 

Recordings from the Media Browser menu. 

Select a recorded item from the list (if previously 

recorded). Press the 

OK button to view the Play 

Options. Select an option then press OK button.

Press the 

Stop button to stop a playback and return 

to the 

Recordings.

If you press 

Pause button while watching recorded 

programmes, the slow forward feature will be 

available. You can use 

Rapid advance button to 

slow forward. Pressing 

Rapid advance button 

consecutively will change slow forwarding speed.

Select the 

Recording Settings item in the Media 

Browser>Settings menu to configure the recording 

settings.
Format Disk: You can use the Format Disk feature 

for formatting the connected USB disk. Your PIN is 

required to use the 

Format Disk feature.

IMPORTANT: Formatting your USB drive will erase 

ALL the data on it and it’s file system will be converted  

to FAT32. In most cases operation errors will be fixed 

after a format but you will lose ALL your data.
If “

USB disk writing speed too slow to record” 

message is displayed on the screen while starting a 

recording, try restarting the recording. If you still get 

the same error, it is possible that your USB disk does 

not meet the speed requirements. Try connecting 

another USB disk.

You can play photo, music and movie files stored on a 

USB disk by connecting it to your TV. Connect a USB 

disk to one of the USB inputs located on the side of 

the TV. Pressing the 

Menu button while in the Media 

Browser mode will access the Picture, Sound and 

Settings menu options. Pressing the Menu button 

again will exit from this screen.

 

You can set your 

Media 

Browser preferences by using the Settings menu.