Moxa IEX-402-SHDSL-T Ethernet Extender Guide De Spécification
1
w w w. m o x a . c o m
i n f o @ m o x a . c o m
Industrial Ethernet Solutions
LED Indicators: PWR1, PWR2, FAULT, STATE, LINK/ACT, CO/CPE,
10/100 (TP port)
10/100 (TP port)
Power Requirements
Input Voltage: 12/24/48 VDC (9.6 to 60 VDC), redundant dual inputs
Input Current: 0.36A @ 24V
Overload Current Protection: Present
Connection: 2 removable 2-contact terminal block
Reverse Polarity Protection: Present
Input Current: 0.36A @ 24V
Overload Current Protection: Present
Connection: 2 removable 2-contact terminal block
Reverse Polarity Protection: Present
Physical Characteristics
Housing: Metal, IP30 protection
Dimensions:
35 x 130 x 105 mm (1.37 x 5.12 x 4.13 in)
Weight: 290 g
Installation: DIN-Rail mounting, wall mounting (with optional kit)
Altitude: Up to 2000 m
Dimensions:
35 x 130 x 105 mm (1.37 x 5.12 x 4.13 in)
Weight: 290 g
Installation: DIN-Rail mounting, wall mounting (with optional kit)
Altitude: Up to 2000 m
Note: Contact Moxa for products guaranteed to function at higher altitudes.
Environmental Limits
Operating Temperature:
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
IEX-402-SHDSL Series
Introduction
The IEX-402-SHDSL is an entry-level industrial managed Ethernet
extender designed with one 10/100BaseT(X) and one DSL port. The
Ethernet extender provides a point-to-point extension over twisted
copper wires based on the G.SHDSL.bis standard. The device supports
a data rate of up to 15.3 Mbps and a long transmission distance of up
to 8 km.
extender designed with one 10/100BaseT(X) and one DSL port. The
Ethernet extender provides a point-to-point extension over twisted
copper wires based on the G.SHDSL.bis standard. The device supports
a data rate of up to 15.3 Mbps and a long transmission distance of up
to 8 km.
The IEX-402-SHDSL series is designed for use in harsh operating
environments. The DIN-rail mount, wide operating temperature range
(-40 to 75°C), and dual power input make it ideal for installation in
environments. The DIN-rail mount, wide operating temperature range
(-40 to 75°C), and dual power input make it ideal for installation in
• Automatic CO/CPE negotiation reduces configuration time
• Standard G.SHDSL data rate up to 5.7 Mbps, with up to 8km
transmission distance (performance varies by cable quality)
• Moxa proprietary Turbo Speed connections up to 15.3 Mbps
• Supports Link Fault Pass-Through(LFP) and Line-swap fast
recovery
• Supports SNMP v1/v2c/v3 for different levels of network
management
Specifications
Managed SHDSL Ethernet extender
industrial applications.
To simplify configuration, the IEX-402-SHDSL uses CO/CPE auto
negotiation. By factory default, the device will automatically assign
CPE status to one of each pair of IEX devices. In addition, Link Fault
Pass-through (LFP) and network redundancy interoperability enhance
the reliability and accessibility of communication networks. Advanced
managed and monitored functionality through MXview, including a
virtual panel, improve the user experience for quick trouble shooting.
negotiation. By factory default, the device will automatically assign
CPE status to one of each pair of IEX devices. In addition, Link Fault
Pass-through (LFP) and network redundancy interoperability enhance
the reliability and accessibility of communication networks. Advanced
managed and monitored functionality through MXview, including a
virtual panel, improve the user experience for quick trouble shooting.
• Interoperable with Turbo Ring/Turbo Chain network redundancy
• Support Modbus/TCP protocol for device management and
monitoring
• Compatible with EtherNet/IP and PROFINET protocols for
transparent transmission
• Easy network management through web browser, Telnet/Serial
console, Windows utility, MXview, and ABC-01
• IPv6 Ready
Features and Benefits
›
Automatic CO/CPE negotiation reduces configuration time
›
Link Fault Pass-through (LFP) support and interoperable with
Turbo Ring and Turbo Chain
›
Turbo speed connections, up to 15.3 Mbps over twisted copper
wires
›
Easy network management by web browser, Telnet/serial
console, Windows utility, ABC-01, and MXview.
Technology
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3x for Flow Control
IEEE 802.1p for Class of Service
ITU-T G.991.2 for Single-pair high-speed digital subscriber line
(G.SHDSL) transceivers
Protocols: SNMPv1/v2c/v3, DHCP Client, TFTP, SNTP, HTTP, Telnet,
Syslog, LLDP, Modbus/TCP
MIB: MIB-II
Flow Control: IEEE 802.3x flow control, back pressure flow control
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3x for Flow Control
IEEE 802.1p for Class of Service
ITU-T G.991.2 for Single-pair high-speed digital subscriber line
(G.SHDSL) transceivers
Protocols: SNMPv1/v2c/v3, DHCP Client, TFTP, SNTP, HTTP, Telnet,
Syslog, LLDP, Modbus/TCP
MIB: MIB-II
Flow Control: IEEE 802.3x flow control, back pressure flow control
Switch Properties
MAC Table Size: 1K
Packet Buffer Size: 512K
Packet Buffer Size: 512K
Interface
DSL Port: DSL Port: RJ-11(RJ-45 connector) or detachable 2-contact
terminal block
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex
mode, and auto MDI/MDI-X connection
Console Port: RS-232 (RJ45 connector)
DIP Switches: Reset button, CO/CPE, SNR/SPEED, ANNEX B/ANNEX
A, STD/TURBO
terminal block
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex
mode, and auto MDI/MDI-X connection
Console Port: RS-232 (RJ45 connector)
DIP Switches: Reset button, CO/CPE, SNR/SPEED, ANNEX B/ANNEX
A, STD/TURBO