Moxa IEX-402-VDSL2 Ethernet Extender Guide De Spécification

w w w. m o x a . c o m

i n f o @ m o x a . c o m

Industrial Ethernet Solutions

Console Port: RS-232 (RJ45 connector)
Button: Reset button

Input Voltage: 12/24/48 VDC (9.6 to 60 VDC), redundant dual inputs
Input Current: 0.33A @ 24V
Overload Current Protection: Present
Connection: 2 removable 2-contact terminal block
Reverse Polarity Protection: Present

Housing: Metal, IP30 protection
Dimensions: 
35 x 130 x 105 mm (1.37 x 5.12 x 4.13 in)
Weight: 275 g
Installation: DIN-Rail mounting, wall mounting (with optional kit)
Altitude: Up to 2000 m

Note: Contact Moxa for products guaranteed to function at higher altitudes.

Operating Temperature: 
Standard Models: -10 to 60°C (14 to 140°F) 
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)

The IEX-402-VDSL2 is an industrial managed Ethernet extender for 
extending up to 3 km of LAN segments over twisted-pair copper 
wires at data rates of up to 100 Mbps using the VDSL2 standard. The 
Ethernet extender is designed with one 10/100BaseT(X) and one DSL 
port. It is the perfect solution to extend copper cable networks beyond 
conventional Ethernet limitations by using existing twisted-pair copper 
wires to reduce new network cable installation costs.

The IEX-402-VDSL2 series is designed for use in harsh operating 
environments. The DIN-rail mount, wide operating temperature range 
(-40 to 75°C), and dual power input make it ideal for installation in 

•  Automatic CO/CPE negotiation reduces configuration time

•  Standard VDSL2 data rate up to 100 Mbps, with up to 3 km 

transmission distance (performance varies with line conditions)

•  Supports Link Fault Pass-Through(LFP)

•  Supports SNMP v1/v2c/v3 for different levels of network 

management

•  Interoperable with Turbo Ring/Turbo Chain network redundancy

industrial applications.

To simplify configuration, the IEX-402-VDSL2 uses CO/CPE automatic 
negotiation (factory default setting). The device will automatically 
assign CPE status to one of each pair of IEX devices. In addition, 
advanced management and monitoring functionalities through NMS, 
including a virtual panel, improve the user experience for quick 
troubleshooting.

•  Support Modbus/TCP protocol for device management and 

monitoring

•  Compatible with EtherNet/IP and PROFINET protocols for 

transparent transmission

•  Easy network management through web browser, Telnet/Serial 

console, Windows utility, MXview, and ABC-01

•  IPv6 Ready

›

›

›

›

›

Standards: 
IEEE 802.3 for 10BaseT 
IEEE 802.3u for 100BaseT(X) 
IEEE 802.3x for Flow Control 
IEEE 802.1p for Class of Service 
ITU G.993.2 for very high speed digital subscriber line transceivers 2
Protocols: SNMPv1/v2c/v3, DHCP Client, TFTP, SNTP, HTTP, Telnet, 
Syslog, LLDP, Modbus/TCP
MIB: MIB-II
Flow Control: IEEE 802.3x flow control, back pressure flow control

MAC Table Size: 1K
Packet Buffer Size: 512K

DSL Port: DSL Port: RJ-11(RJ-45 connector) or detachable 2-contact 
terminal block
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex 
mode, and auto MDI/MDI-X connection
DIP Switches: CO/CPE, SNR/SPEED, STD/INP
LED Indicators: PWR1, PWR2, FAULT, STATE, LINK/ACT, CO/CPE, 
10/100 (TP port)